The thing that drives rough cut lumber Is not that you have the material to sell. It has more to do with the type of tree it was cut from and the size of the actual products you want to sell. Wood planet reclaimed is a good site try the suppler directory and the RFQ's If you need help you could try barn cash info. Good Luck to you
Yes, common yard lumber is suitable for rough carpentry.
Re sawn lumber is achieved by re-processing smooth standard milled lumber to achieve a roughened surface, normally for aesthetics. The lumber is passed along a saw blade to achieve the desired effect. The finished size is smaller than nominal call-out dimension. Rough sawn lumber is the board, plank or timber prior to milling for final sizing. Rough sawn lumber is larger in dimensions to the nominal call out. Rough sawn lumber is sometimes referred as rough milled lumber when certain exact sizes are desired.
Rough cut refers to the first cutting of the board from the unprocessed timber. This creates a piece of lumber with almost exact measurements and a splintery, rough surface.Dressed lumber is created when a rough cut board is passed through a planer. The planer removes a very thin layer of wood, creating a smooth finish. Lumber can be dressed on all four sides [aka D4S] or only two [aka D2S]. Dressing is also known as Surfacing. Similarly, Surfaced Four Sides [aka S4S] and Surfaced Two Sides [aka S2S] mean the same. Note: Dressing changes the actual size of the rough cut measurement. For example, a piece of 2x4 lumber that has been dressed on all four sides has an actual measurement of approximately 1.5 inches thick by 3.5 inches wide.
Keep the lumber dry otherwise it will not ignite.The lumber is stored in the cellar.We need more lumber.Lumbar and lumber are not the same thing.
Timber is to lumber as quarry is to stone because timber is where cut lumber comes from and a quarry is where cut stone comes from.
Nominal Dimension Lumber is what it's cut to and Net dimensional Lumber is what it actually is.
Kermit A. Schott has written: 'The effect of edging red alder lumber on cut stock production' -- subject(s): Lumbering, Processing, Red alder, Lumber, Computer simulation, Cost control
all lumber and materials are shipped to the site already cut
Cloth for patterns; lumber for building always have to be cut.
Rough Cut Diamond was created on 2009-07-22.
In my world timber is still standing in the woods and is cut down into logs. Then the logs are taken to a sawmill and cut into lumber. Some places refer to timber as wood that has been cut from trees into a usable form, so a place where logs are cut into timber is a sawmill. (The word lumber has this meaning in North America.)