0
What else can I help you with?
What drill bit for a 5mm-5 taps?
A 5mm Drill bit is a ...wiki.answers.com/Q/What_is_a_6mm_drill&action=edit§ion=new
What is the drill bit size for 5 mm anchorage?
If you are hoping to insert a 5mm anchor, the hole must be close. I would drill a 5mm hole.
What is the recommended size for a drill bit to use with a 5.5mm screw?
The recommended size for a drill bit to use with a 5.5mm screw is typically 5mm.
5mm drill bit equals how many inches?
5 mm = 0.1969 inch (rounded) Direct Conversion Formula 5 mm* 1 in 25.4 mm = 0.1968503937 in
How is a masonry bit used?
Masonry refers to brick and cement. If you have to drill a hole in that kind of material, just put the masonry bit in your drill, and you can drill the hole in exactly the same way that you would drill a hole in wood, it works the same way.
What makes a drill bit a screw?
Drill bits and screws are not the same and cannot be converted. vido produces drill bits with high quality, exported overseas and loved by the public. If you want to buy a drill, you can go to VIDO's official website to check.
What is the difference between a drill bit for plastics and one for wood?
There is no difference, I drill both frequently with the same drill bits.
How do you put a drill bit in a drill?
To put a drill bit in a drill, you typically loosen the chuck, insert the drill bit into the chuck, and then tighten the chuck securely to hold the drill bit in place.
What drill bit you use for a 0.875 hole?
You use a 0.875 bit or a 7/8 bit . They are the same size.
Where are timing marks on saxo 1.1?
if you want to use the timing marks to lock the engine up then you have to turn the engine over until the camshaft pulley meet up with the hole in the head, the hole is about 8-10mm. stick a drill bit in the hole. then you lock the crank up by putting a 5mm drill bit in the flywheel, should be about lined up when you put your first drill bit in. might need a bit of a wiggle. mark where they pulleys are anyway just for satisfaction.
What is the difference between a stone drill bit and metal drill bit?
metal drill bit has a finer point
What material drill bit is best to drill out bolts?
A titanium or cobalt drill bit.
