The error is introduced by the thickness of the mirror is called the reflective error. It all depends with which side the mirror is coated. The type of mirror in question also plays a role.
As you read the meter, you're supposed to line up the needle with its image in the mirror. When you do that, you know you're looking at it exactly perpendicular to the numbers, not on a slant. That eliminates the possibility of introducing an error into your reading because of "parallax".
There is no standard thickness.
To do this get a plane mirror and two pins. 1.place the first pin in front of the mirror and let it stand firmly. 2.the second pin would act like a search pin-move it until it coincide with the image of the first pin. 3.avoid error due to parallax in 2 4.read the distance of the first pin from the mirror and now the second from behind the mirror,you will find out they are approximately the same since you can't do it perfectly at home. 5.Any small object can also be used
What is the thickness of a pencil point
An ultrasonic thickness gauge is required for measuring the thickness of different types of materials. The best ultrasonic thickness gauge you can buy is the Defelsko Corporation Ultrasonic Thickness gauge.
As big an error as it was for imaging, the actual flaw was only about the thickness of a human hair.
An error in balancing is called an "error of measurement". The type of error that will be introduced if one fails to set the zero point of the balance before making the reading is a systematic error.
Error code 418 means "I am a Teapot". The error may also be Short and/or Stout. This error code was introduced as an April fools joke.
$500
while doing experiments the analog readings should be taken very carefully ..the pointer should be in a parallel axis with your eyes so that the reading will not deviate from right one.otherwise error may occur this error is called parallax error. this error can be avoided by placing mirror at bottom of dial to adjust the axis with your eye by seeing in to mirror and the pointer
That's great I have learned something new
A mirror has no color. A perfect mirror will reflect all light equally and spectrally. A spectral reflection is one where all light hitting the mirror from a single direction is reflected in a single direction as it leaves the surface.As mirrors are usually constructed behind a thickness of glass, the glass itself can sometimes absorb certain colors and so the mirror does not reflect all colors fully. Then it may appear that the mirror has a color.There is no specific color of mirror. A mirror is a silver plated surface covereg with plane glass, reflecting whatever color coming in the front of it.
noob
No....the two are mirror images of each other. Reducing type I would increase type II
On a two way mirror, if you put your fingernail up against the glass and the reflection of your nail touches your nail then it may be a 'two way mirror.' On a regular mirror, the silver that reflects is painted to the back of the sheet of glass. Do the fingernail test at home on a regular mirror. Because the silver is on the back of the glass, there should be a gap between your nail and the reflection the thickness of the glass, maybe a 1/4 inch. A two way will not.
It is running the same tests that found the error again after an error has been fixed to ensure it has been fixed and no other errors have been introduced as a result of what was done.
A DNA mutation. In this case an error that is introduced before transcription.