Want this question answered?
nope! that would ruin your stuff plus amps is what actually powers appliances so if you dont have enough it wont power up (amps is another word for current)
If the device can be recharged it must have a rechargeable battery. Charging it at 2 amps instead of 3 amps would mean it takes 50% longer to charge.
NO
Only if you want to blow up the microwave. That will let 20 amps go through before the fuse blows when the manufacture is telling you 18 amps max. <<>> Yes, you can use the 20 amp fuse. At 250 volts 2 amps is no problem and you are not going to blow up the microwave. On a fault current the 20 amp fuse will trip just as fast as an 18 amp fuse.
Use the correct fuse and nothing else.
Use AWG #10 wire on a 20 amp breaker.
Yes you can
In your car it will probably be OK except in extremely cold conditions or after 2-3 years use.
You might get away with a 5amp fuse, for a time at least, but NEVER use a fuse of higher current than specified, or a non-fusible link like a metal rod.
NO! The use of a higher rated fuse than is recommended can cause the wiring to overheat and cause a fire. Use exactly what is required.
nope! that would ruin your stuff plus amps is what actually powers appliances so if you dont have enough it wont power up (amps is another word for current)
This is not a good idea to do. Sometimes just that little bit of extra current that the 45 amp fuse will allow to reach the 40 amp load might be enough to destroy the device.
Normely Television use with single phase 230vac & Television watts 150w to 50w,Current is 1amp to 2amp,Use 5Amp Socket.
Yes, use a car CB homebase 12 volt power supply that exceeds by a couple of amperes the need of the Amp, also you want to factor in radio/cd players needs as well. I hope this may help someone. Yours The Reverend Rat +:-)
Car Bomb
If the device can be recharged it must have a rechargeable battery. Charging it at 2 amps instead of 3 amps would mean it takes 50% longer to charge.
No