If they are grounded they get an electric shock or electrocuted. If they are not grounded or in simultaneous contact with the neutral wire, nothing. That's why birds can sit on a high voltage wire and survive; they are not grounded.
when a LED is subjected to a high voltage it will heat up and burn the internal junction, which will leave the LED open circuit.
depending at the kind and high at the voltage, or/and the high of the power
punchthru, resulting in destruction of the FET
the inductive load which is generally use in high voltage transmission line known as transformer. the transformer transform the high voltage to low voltage.
If there is a short circuit between the transformer's high-voltage windings and its core (or any other metal parts, come to that) the fault will be recognised by the high-voltage supply's protective system, which will quickly disconnect the high-voltage line. For this to happen, the metal parts of the transformer, including its core and metal container, must be earthed or grounded to provide an electrical path back to the source of the high voltage.
No. only if you take it.
It can be connected in high reverse bias voltage .
when a LED is subjected to a high voltage it will heat up and burn the internal junction, which will leave the LED open circuit.
In this case current flows from a high voltage to a lower voltage in a circuit.
depending at the kind and high at the voltage, or/and the high of the power
Spark plugs don't produce high voltage they just make sparks with high voltage. The high voltage in a car is produced by running the low voltage of a car through a coil and condenser a distributor defines exactly when the spark happens to light up the fuel in the cylinder
If the vswr (Voltage Standing Wave Ration) is high than call drop chance increase.
high voltage pass 220v instead of 110 to xerox 7335 machine
It is true that high voltage light directly to eyes, can make someone feel dizzy.
cureent becomes high
A high voltage transformer is a very dangerous piece of equipment. The voltage level is enough to electrocute a person if handled improperly. Only trained professionals should work with this type of equipment.
Heat is conducted form the high temperature body to the low temperature body until their temperatures are the same.