It Can Cause The Rocket To Spin Out, and/or wobble of course
It can cause the rocket to spin out or it could make it wobble
It will have no stability and corkscrews easily.
Nose cone, fins, body tube, recovery system, motor (s) , launch lugs, recovery wadding.
That is the front of the fins
Model rockets launch by sliding up a rod/wire that is pointing toward the sky. A launch lug is a small tube (like a drinking straw on a small rocket) glued to the side of the rocket body. You slide the small tube (launch lug) down on the rod. The launch lug and rod guide the rocket to start it in the correct direction until it gets going fast enough that the fins can stabilize it. Visit the links below. The first picture shows a rocket on the rod. It's a little hard to see but the rod goes through the launch lug. At the very beginning of the second link, they are sliding a large rocket lugs onto the rod.
Balsa fins refer to the fins that are made for model rocketry and are cut from balsa wood. These are glued or cemented onto the base of the cylindrical part of the rocket. They are crucial to the flight stability of the rocket.
about one-forth of the height of the size of the rocket.
They hold everything together, the fins, the motor and the nose.
by water being placed into the bottle and then, when you launch your rocket, the rocket will spin (if it has at least 2 fins) and the water will spurt out and make the rocket go higher in the air. (Tip:the more it spins,the higher it will fly)
You use fins and a nose cone on a bottle rocket because the cone reduces the drag on the rocket, and the fins help stabilize the rocket.
the fin keeps the rocket stable while the rocket flys.hope that helps! POKECARP out
Fins on a rocket affects its flight by the way they are built on the rocket
Wat is the disadvantage to having 4 fins on a rocket.?
the best fins for a bottle rocket is having four fins located at the bottom of your bottle rocket the shape of long triangles ! ! ! :) hope it helps !