what happens when refrigerant enters the condenser
When refrigerant enters a condenser, it is a high pressure hot gas, it gets cooled down, and condenses into a high pressure liquid refrigerant.
The Refrigerant enters the condenser as a high pressured gas, the condenser then condenses that gas and changes it to a liquid form.
Refrigerant enters the condenser as a high pressure vapor. In the condenser, the heated refrigerant is cooled by transferring its heat to the air which passes through the condenser fins, and it changes state to a liquid during this time.
It's transferred to the air which passes through the condenser fins.
Refrigerant enters the condenser as a high pressure vapor. In the condenser, the heated refrigerant is cooled by transferring its heat to the air which passes through the condenser fins, and it changes state to a liquid during this time.
Refrigerant should be removed from the condenser outlet when:
The refrigerant which was in the form of gas before entering the condenser, condenses (converts to liquid refrigerant) as a result of the gas being compressed. This condensation will release heat which is partly taken away by the function of the fan (the rotating blades) in order to prevent the compressor from overheating.
The reason why it is called a barometric condenser is because it makes contact and it is a long vertical pipe into which it condensates and cools the liquid flow to accomplish the removal of pressure. It is also stated that when the pump is used the system is called a low level barometric condenser.
Liquid receivers are used to store the liquid refrigerant after it leaves the condenser. It should be located below the condenser to enable natural flow. The receiver may be constructed either vertically or horizontally and should have sufficient capacity to hold the entire system's refrigerant charge. The design should be such that only liquid refrigerant leaves the receiver and enters the liquid line. by vishal mahnn
In Liquid state
Pretty simple, it condenses the refridgerant into a liquid (giving off energy as heat) the cooling happens later in the evaporator part where the liquid turns back into a gas (taking the energy from surrounding area, thus lowering the temperature. The condenser turns the refrigerant into a liquid by lowering the volume it is occupying, tightening up the molecules turning the refrigerant into a liquid.
Pretty simple, it condenses the refridgerant into a liquid (giving off energy as heat) the cooling happens later in the evaporator part where the liquid turns back into a gas (taking the energy from surrounding area, thus lowering the temperature. The condenser turns the refrigerant into a liquid by lowering the volume it is occupying, tightening up the molecules turning the refrigerant into a liquid.
The first step in changing a condenser in a 2001 Kia Sephia is to disconnect the refrigerant lines and unbolting the condenser. Lift the condensers out, replace with the new one, and reconnect the refrigerant lines and bolts.