0
Home stereo systems are usually built to work with speakers that have an impedance of 8 ohms, Car stereos are usually adapted to power 4 ohm speakers. You need to get this right if you want to keep your amplifier happy.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What is the wattage of a Rockford Fosgate Punch 45?
rated at 22.5 watts per channel in stereo and under a 4 ohm load per channel.... although the birth sheets they were shipped with normally stated the wattage as tested to be around 75 to 86 watts per channel in stereo running on a 14.4 volt system... bridged possiby as much as 150 to 200 on 14.4 volts !! very stout little amps and ive seen two run 8 rockford 15's back in the day !! WOW !!
Is it possible to wire two 16 ohm speakers to a car stereo and if so bridged or in series or parallel or something completely different?
Typical car stereos run speakers at 4 to 8 ohms, so I would wire the two 16 ohm speakers in parallel to get a net 8 ohms. Anything over that would be a little much for a car stereo. You don't need to drive it that hard.
What is better 16 ohms speakers or 8 ohms speakers?
It depends on the application. If you have an amp that is stable in 8 ohms per channel, then 8 ohm speakers will work best. However, if you wanted multiple speakers on that channel you could use two 16 ohm speakers.
How do you convert 8 ohms to 4 ohms?
wire two 8 ohm speakers in a parallel circuit!
Whats the difference between a stereo receiver and a channel stereo receiver?
They're both the same. A "channel" stereo receiver merely accepts a given number of channels (2,4,5, &tc.). A stereo receiver has 2 channels of audio output, left and right. A receiver marked as ___ channel receiver has the corresponding number of channels. For instance a 5 channel stereo receiver can play 5 different channels of audio through 5 speakers. If the receiver has a decimal, such as 5.1 or 7.1, that indicates that it has 5 or 7 channels of regular audio, plus 1 channel for subwoofer, making them 6 and 8 channels, respectively.
Will my kids band be able to use the Pyle Pro 8 Channel Stereo Pa Mixer Sound Board?
yes, because Pyle Pro 8 Channel Stereo Pa Mixer Sound Board has all Input Channels Features LED Peak Indicators For Visual Signal Monitoring and has 3 – Band EQ(High – Mid – Low) On Each Input Channel .
8 Ohm plus 8 Ohm equals?
16 Ohms. Yes 16 ohms in series. 4 ohms in parallel
What is rear 8 inch speaker impedance?
The nominal 8 inch speaker impedance can be 4 ohms, 8 ohms or 16 ohms. It depends on the make of the loudspeaker not on the 8 inches.
How do you bridge three subs to a two channel amp?
3 passive sub at 8 ohm imp in parralel will be 2.6+ impedence.Most of the professional sum amp can take up to 2 ohms load per channel(check the spec of the Amp)eg: you should be able to connect max 4 subs in each channel(match the watts pwr to amp)
What is the resistance of an 8 gauge wire?
According to the Wire resistance tables, 8 AWG has a resistance of 0.6282 ohms per thousand feet.
What is 8 mega ohms equal to in kilo ohms?
Mega is 8 X 10^6 and Kilo is 8000 X 10^3. For every 3 you go down in powers you divide by 1000, so 8 Mega ohms is 8,000,000 ohms. 8,000 Kilo ohms or 0.008 Giga ohms.
What is the best set up for two 8 ohm 1600w speakers and a 500w amplifier with outputs at 4 ohms 5.2ohms or 42 ohms?
Use 5.2 ohms, which is the closest to 8 ohms.
