inch size bolts have the number of teeth in the length of 25.4mm length while in mm size bolts has the number of teeth on the 1mm length...so mm size(TPM) thread is more strengthen than inch(TPI) size bolts
725 mm / 25.4 = 28.5433 inches
The bolt pattern for a 1966 Mercury Comet is 5x4.5 inches (5x114.3 mm). This means there are 5 lugs or bolts on the wheel hub and the distance between each stud measured in a circular pattern is 4.5 inches.
210 mm = 8.26772 inches. 1 mm is 0.0393701 inches.
30.6 mm is 1.2 inches
These are the units of length, SO ,we need to find out the relation between both these units.mm and inchese are related to each other as follows : 1 inches =25.4 mm. which means 1 mm=0.039 inches . Now,2 mm=2 * 0.039 inches . the result is 0.078 inches.
1 inch = 25.4 mm 4.75 inches = 120.65 mm
Nothing - they are both the same measurement. One is metric - the other is imperial.
725 mm / 25.4 = 28.5433 inches
mm is millimeters. meters is 1000mm
Just one mm is all the difference there is.
5x4.5 inches or 5x114.3 mm
A desert receives less than 10 inches (250 mm) of precipitation per year on average. A semi-arid region usually receives between 10 and 20 inches (500 mm) of precipitation per year on average and are frequently grasslands.
17mm
The bolt pattern for a 1966 Mercury Comet is 5x4.5 inches (5x114.3 mm). This means there are 5 lugs or bolts on the wheel hub and the distance between each stud measured in a circular pattern is 4.5 inches.
1 cm is equivalent to 10 mm. So, the size difference between 1 cm and 9 mm is 1 mm.
4 x 114.3 (mm) or 4 x 4.5 (inches)
94 mm on a ruler is between 90 mm and 95 mm. On a typical ruler containing both mm and inches scales, where the scales are reversed with respect to each other, 94 mm is opposite 8 5/16 inches.