pcc is the power control center, in which all distribution switches are installed and operated here
MCC-Motor control center which consist of motor staters to control the motor. PCC-power contol center which is control the power to distribution system
PCC is plain cement concrete. It consists of cement, sand, aggregates and water. It is good at resisting compression. RCC is reinforced cement concrete. It consists of cement, steel, aggregate and water. It is good at resisting tensile stresses also.
Double bus bar is related to power control center (PCC). PCC is the main LT power distribution in any industrial establishment or large residential complex too. It basically an electrical panel with required number of incomer feeders and outgoing feeders. Power source like state power or captive power provide the incomers and outgoing feeders cater to the down stream power panels for further distribution( to MCC). Any PCC has one or more incomer and one or more outgoing feeder and bus isolators depending on the requirement. This PCC needs to have a bus bar to which the incomer gets connected and feeds the power to the bus and the outgoing feeders are connected to the bus bar to deliver the power down stream. This bus bar can be single bus bar system or double bus bar system. In a double bus bar system the two different power sources are connected to two different bus. Say one bus is for DG set power another bus is for SEB power. Both the buses can be charged simultaneously and can feed any outgoing feeders. The out going feeder have flexibility of getting the power either of the buses, but not simultaneously from both the buses. Double bus bar is more expensive compared to single bus bar system but more flexible, reliable.
Depending on how many breakers you have in your exisiting panel if you only have a old 6 or 8 circuit panel then I would suggest a new panel, In the newer building world where you have a 20 or 30 circuit panel then I would suggest a sub panel.
There is no difference between PCC ( Power Control Centre) and PDB (Power Distribution Board). Although they have different names, but their functions are same i.e. controlling power feeders.
PCC Group was created in 1993.
PCC stands for: Portland Cement Concrete.
PCC Group's population is 2,200.
RCC is Reinforced Cement Concrete. PCC is Plain Cement Concrete. The main difference is that PCC has no reinforcement in it.
People are gay; institutions like PCC are gay-friendly.
PCC Natural Markets was created in 1953.
Propanol will be oxidized to PROPANAL when react with PCC
The population of PCC Rail Tabor is 700.
MCC panel is the bunch of motor feeders from where you can control power to connected motors, that's why it is called Motor Control Centre. PCC ( Power control centre), comprises of HT breaker's which controls power to transformers/ MCC's/ HT motors.
PCC STUDENTS has written: 'POLITICS' 'STUDENT PAPERS'
Pcc = portland cement concrete or pre cast concrete