The bare wire is the equipment grounding conductor. Its purpose is to ground the metal parts of equipment that are not part of the circuit. This assures the proper function of the breaker in the event of a fault.
It exists for your safety and disregarding it exposes you to potential danger, even death.
Yes, if it is not an insulated wire. If it is bare copper it is always ground. But the hot and neutral wire are also copper, they are just insulated.
No, you can use #4 bare copper ground wire.
#6 bare copper wire.
A 100 amp residential service requires a size #8 copper wire, it should be insulated in green.
Assuming the wires are the correct gauge for application and breaker you use black and white wires as hot. Put red electrical tape on each end of white wire and connect red and black to the breaker output and bare wire to ground lug in panel. At receptacle connect black and red to hot contacts and bare wire to ground lug.
The electrical terminology of a wire with no insulation on it is a bare wire.
Could have a short in your wire, a bare wire touching bare metal could cause it to ground out.
white wire = neutral bare wire = ground black wire = line voltage red wire = returned from a switch, or the other phase of line voltage in order to supply 240VAC
If you mean a bare copper wire, that is the "ground" wire.
Bare cable is simply a conductor without a coating, sheating, or covering. It is just bare wire.
It just means that the bare wire is insulated by a non-conducting coating. In home wiring the typical circuit has a black wire (Hot), a white wire (Neutral) and a bare wire which is ground.
uncovered conductor such as insulation ,that is said to be bare conductor.
The copper is a good conductor of electricity. While the insulating plastic covering of the wire prevents bare wires touching and creating a short, or shocking (electrocuting) a person should the bare wire be touched with bare hands.
Cu110 compositon
If your getting a shock by touching a wall than you have a bare wire touching the wall, call an electrition
A ground wire can be bare because it is not a current carrying conductor. It is at the same potential as all the rest of the metallic conductive objects that make up the electrical system that the ground wire is grounding.
Black wire is HOT, white wire is NEUTRAL and bare or green wire is GROUND. The black wire goes to brass colored screw, the white wire goes to silver colored screw and the bare wire goes to green screw that is connected to the metal "frame" of the receptacle.