P0016 - Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor A)
symptoms
The engine may turn over but not start up
The engine may rattle near the harmonic balancer which means that the tone ring is damaged
The engine may start up and run, but run rough
cause
Timing chain is stretched, or timing belt skipped a tooth because its worn
Timing belt/chain not aligned
Tone ring on the crankshaft slipped or broken
Tone ring on the camshaft slipped or broken
Faulty crank sensor
Faulty cam sensor
Bad wiring to crank or cam sensor
Timing belt or chain tensioner faulty
The fix
Check the cam and crank sensors and their wiring for damage. If you see broken/frayed wires, repair.
If you have a scope, check the cam and crank patterns. If a pattern is missing, suspect a bad sensor or a slipping tone ring.
Remove the cam gear and crankshaft balancer and tone rings for proper alignment, make sure they're not loose or broken and they haven't sheared the alignment key. If they are correctly installed, replace the sensor. If the signal looks normal, then check the timing chain/belt for proper alignment. If it's not aligned, check for a damaged tensioner.
Also check that the belt or chain isn't stretched. replace and recheck.
Trouble code P0017 means: Crankshaft position/camshaft position, bank 1, sensor B- correlation
This sort code is non-existent. Please check you have the correct code. You can visit your local branch for sort code assistance.
Southampton.
58/25/61/1958/25/61/19
DIRECT BANKING Leicestershire, LE87 2BB, Phone: (845) 7555555, Leicester England
This code cannot be traced. Please check you have the correct one. Visit a local branch near you for help and guidance.
You will get error code P0016. And you will hear engine knock.
Trouble code P0016 means: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A Trouble code P0034 means: Turbo/Super Charger Bypass Valve Control Circuit Low
This code is for a problem with the cam / crank correlation and the variable timing system. Several difernt things can cause this code. Anything from a bad sensor, solenoid, to internal engine problem.- Tech JK --------------------------------------
No
move out of the way
you have to dogde everything they throw at you
No, a Mustang can not beat a dogde charger
ezio does that automatically or you could dogde the attack
It's in the fuel tank.
Yes
What is the pin code for club fun 25?'
you just dogde them till you get the shovel