operation at which the operation remains constant with time.
The ozone layer is not fixed. It must be fixed.
the fixed the fixed
Solids are substances which have a fixed volume and fixed shape. Liquids, on the other hand, have a fixed volume but no definite shape. Finally, gases don't have a definite volume or shape.
of Bed, A bed and its furniture; the materials of a bed, whether for man or beast; bedclothes; litter., The state or position of beds and layers.
A gas
The problem is that if it was fixed it will take more space than folding.Gurjot Singh Sodhi
The main defference is in Milling Machine job is fixed and tool will move. For planning machine tool is fixed and bed will reciprocate.
It's probably just a scent thing.Even fixed cats do stuff like that sometimes.
The bed on a pop up camper can be fixed several ways but it depends on what is wrong with it. If it is just a matter of what sheets to use, the typical size is Queen and it is made by covering the cushion with the sheets. If the bed is in need of reinforcement a new bed tray can be made with plywood.
Sunday Eghwomoni Isiakpere has written: 'The dynamics of a fixed bed catalytic reactor with complex kinetics'
The bed of a lathe is the central beam that runs down the machine. The head, which holds and turns the workpiece, is fixed at one end, there is a tailstock at the other end which can be adjusted along the bed, and usually a carraige in between, which holds turning tools. The workpiece that can be turned in the lathe is limited to what will fit in the head without hitting the bed. A gap bed lathe has a gap in the bed near the head, so a larger workpiece can be turned.
Sleep outside until the bed bug problem is fixed
A sofa bed is "un canapé-lit" or "un clic-clac" depending of the system (the canapé-lit has a fixed back, while the back is used to sleep on with a clic-clac)
The bed of a lathe is the central beam that runs down the machine. The head, which holds and turns the workpiece, is fixed at one end, there is a tailstock at the other end which can be adjusted along the bed, and usually a carraige in between, which holds turning tools. The workpiece that can be turned in the lathe is limited to what will fit in the head without hitting the bed. A gap bed lathe has a gap in the bed near the head, so a larger workpiece can be turned.
The tailstock, turret Stock, and steady rest are capable of sliding and/or being fixed on the bed! The Tailstock to center the workpiece, and help prevent deflection. The turret stock to perform work on the end of the workpiece, the steady rest can be fixed neat the end of a long workpiece to stabilize it for work. And then there's the follow rest which can be fixed (bolted) to the saddle (so now it slides) opposite the tool bit to prevent deflection when turning in the middle of a long workpiece then removed! I'm VERY SURE I'm ignorant of many ADDITIONAL Sliding and Fixable thingies!!!
The box of the lightning is nothing special. This is just body work and can be done by any competent body man.
Bed, Bath and Beyond gives out various discount coupons including fixed dollar discounts or fixed percentage discounts. These discounts vary from periodically and may be larger or smaller depending upon the economy and local market conditions.