It use words like how to, in process of, the follwing steps. Sometimes they use first, second, third.
the switchover
Oversampling is part of signal processing. It is the process of using a sampling frequency that is higher than the Nyquist rate to sample a signal.
a single loop is a signal
Zero order hold is used in Digital - Analogue converters (DACs). It literally holds the digital signal for the sample time, then moves to the next digital sample and holds that signal for the sample time as well, in order to reconstruct the analogue signal.
Demodulation takes place to extract the low-frequency signal from the high-frequency carrier, using a nonlinear process that produces components at the signal frequency. The LP filter is used to eliminate the high-frequency carrier component from the signal so that it does not cause problems at a later stage in the amplification of the signal.
The 'kill' command is used to send a 'signal' to a process. The process is then free (for the most part) to interpret the signal as it wishes, assuming it is not a termination signal that cannot be ignored. A signal is an interrupt to the process; there are many signals that may be sent to a process or program.
DSP -Digital signal processing the word it self says it is process of analyzing the digital signal . The system which does this work of analysis is the digital signal processing system. In this system the raw analog signal(ex:human voice) which is time domain signal is fed to the pre aliasing filter which removes noise part of the signal and this fed to the sampling and quantization in which the real time analog signal is discretized and digitized . After this process this digitized signal is fed to the DSP processor to do the specific operation on the signal (ex: convolution , modulation etc.,) .This processed signal is fed to the D/A which converts the digital signal to the analog signal real time signal. after all explaining the process of signal processing. the stages between the sampling and D/A is the digital processing system.
signal
The plural form of the word signal is signals.
Signal is a way of communication between process and OS kernel. If process (running program) undergoes any serious issue, then kernel generates signal .
no dah
The word signal has two syllables. The syllables in the word are sig-nal.
Kill is a program that can terminate or send a signal to process.kill -9 pidWould send signal 9 to process having specific pid. 9 Means KILL signal that is not catchable or ignorable. In other words it would signal process (some running application) to quit immediately.pid - process identifier.
The word "signal" originated from the Latin word "signum," which means a sign or indication. It was later adopted into Middle English as "segnal," then evolved into the modern English word "signal."
When transmitting a message, a signal travels through the neuron until the cell ends at the terminal. In order to propagate the signal to the next neuron chemical messengers (neurotransmitters) are released into the inter-neuronal space (synapse). This triggers signal initiation in the second neuron.
A: It reference to processes of data gathering from a signal. Like telemetry of heat, and other parameters that the signal may represent,
Yes.