0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is a fast fill valve in a master cylinder?
A fast-fill valve in a master cylinder acts as the inlet port and the compensating port. fitted between the reservoir and the cylinder bore. It is a combination valve with a ball and a pressure seal. Depending on the pressure, it allows flid to flow from the large bore of the cylinder to the reservoir, or from the reservoir into the large bore.
What is the purpose of an anti-drain back valve?
To maintain fuel pressure at the fuel rail, for fast start up.
How do you change brake oil?
There is no such thing as "brake oil." There is brake fluid that can be replaced (if you wish) at JiffyLube or one of the other fast-lube shops.The mechanic will open a small valve at each wheel to drain old fluid while an assistant replenishes the fluid level at the master cylinder.
Why are hemi fast?
They are the best flowing 2 valve cylinder heads because... the valve lay out allows the biggest valves possible for a given bore. straightest intake/exhaust ports also because of... central spark plug location less prone to detonation due to the tumble eff. of the valve layout.
Why does a cam shaft run at half the speed of the crankshaft?
The four strokes of a four-stroke engine are intake, compression, power and exhaust. The crankshaft controls the upward and downward motion of the pistons. The camshaft controls the opening and closing of the intake and exhaust valves. Intake stroke- the intake valve is open and the exhaust valve is closed. The piston moves downward, decreasing the pressure in the cylinder, which draws the fuel-air mixture in through the intake valve. Compression stroke- both the intake valve and the exhaust valve are closed. The piston moves upward, compressing the fuel-air mixture. When the piston nears TDC (top dead center), the fuel-air mixture is ignited by the spark plug. Power stroke- both the intake valve and the exhaust valve are closed. The explosion caused by the ignition of the fuel-air mixture (combustion) forces the piston downward. Exhaust stroke- the intake valve is closed and the exhaust valve is open. The piston moves upward, forcing the gases produced by combustion out of the cylinder through the exhaust valve. So, for each firing of a given cylinder, the intake valve opens once and the exhaust valve opens once. But, for each firing of a given cylinder, the piston must travel downward and then upward twice (in each direction.). Therefore, the crankshaft must rotate twice per given cylinder firing, while the camshaft rotates only once per given cylinder firing.
Is a 5 cylinder car fast?
It depends what your definition of fast is. Most any car can go fast.
How fast can master chief run?
100%
How do you find latios fast and easy?
it won't be fast or easy unless you have a master ball
What is the MacDonalds purpose?
The purpose of McDonalds is to provide fast service and fast food at a reasonable price. Their corporate purpose is to streamline services and make as much money as possible.
What is the purpose of mcdoanlds?
fast food?
How do you get master ball fast in Pokemon diamond?
Have a friend trade you a Pokemon holding the master ball they got.
How do you fix a fast idle valve 95 civic?
http://www.jdmuniverse.com/forums/how-tos-tutorials/90246-honda-fast-idle-valve-fiv-pulsing-idle-fix.htmlGo to this link
