A rollover cable is used in a networking environment where a router/switch is to be configured from a computer. One end is wired one way but on the other it is reversed. You would typically use one end into a serial port on a PC and the other into the console port of the switch/router. It is common within Cisco configurations.
Hope I helped
It is called consoling into the Router. You have a terminal program on the computer your wanting to use to connect to it. Then you plug the serial side into the serial port. next the RJ-45 jack into the "console" port of the router.
A rollover cable is used to connect a computer to a router. They call it rollover cable because of how the wiring scheme of both ends are reverse to each other.
rollover cable
To connect to a cisco 1800 series router, you need either a network connection that goes to the router, and then you would configure the router to allow telnet or you would need a console cable, also called a rollover or cisco cable and physical access to the device.
Rollover cable (also known as Cisco console cableor a Yost cable) is a type of null-modem cable that is often used to connect a computer terminal to a router's console port
ROLLOVER Cable
1. Its a rollover cable. 2. I'm not doing all your cisco questions. 1. Its a rollover cable. 2. I'm not doing all your cisco questions.
It would be possible to obtain a Cisco router cable from various different stores and outlet stores that sell cables and other equipment for internet connections such as the Cisco router cable in particular.
When you want to configure a switch and/or a router.
When you want to configure a switch and/or a router.
neither, you need a rollover cable
A rollover cable is typically used to connect from a DB9 serial port on your computer to the RJ45 console port on the router. An RJ45-RJ45 rollover can be used from Aux port to Console port or from the ports on a 2509-RJ/2511-RJ to a console port.
It routes things... lol If you have a cable internet connection for instance, the cable company gives you a cable modem that connects to the cable jack in the wall. To split this signal amongst multiple computers you need a router. The router plugs right into the modem and the computers plug into the router. The router then will devide the internet signal between the computers.
Rollover cable is used.