A sacrificial anode is a piece of corrodible metal which is preferentially consumed by electrolytic action.
Just have a crack at Sacrificial anode in wikipedia.org.
Yes, they metal used is called an "sacrificial anode".
Sacrificial anode.
A sacrificial anode is used to send stary current to ground through the anode. This wiil cause the anode to be eaten away saving the pipe from this effect. If you put two dissimilar metels together like brass and iron, it can make a weak battery and make a current. Some soils or other environments can cause this effect.
remove one of the essential components fo corrosion-eg moistureinstall a sacrificial anode
I've never heard that exact phrase used, but I'm guessing you're talking about a sacrificial anode. This is a piece of more active metal that's electrically connected to a piece of metal you want to protect; the sacrificial anode corrodes instead of the less active metal.
As a sacrificial anode on boat hulls and oil drilling rigs etc to prevent corrosion
The anode creates a galvanic cell in which magnesium or zinc will be corroded more quickly than the metal of, let's sa a tank.
Will that work to eat up the Zinc(anode) instead the iron pipe ?Will the copper lead the ions to the zinc, or its resistivity will jeopardize the sacrificial protection combination ?thank you
The sacrificial anode in a Hot Water Tank takes most of the rusting problems away from the tank itself, hence the word "sacrificial!" When the anode has finished its course of use, you will get rusting happening on the walls of your tank which leads to a wrecked and leaking hot water tank. Manufacturers do NOT want home owners to know about these anodes, because if everyone replaced them there would not be any hot water tanks to replace.
Pipe flanges are protected from corrosion by means of electrolysis,with dielectric flanges. The piping system is electricaly insulated by what is called a sacrificial anode. A bag of readily corrodable metal is buried in the ground with a wire running from the pipe to the bag so that the sacrificial anode will corrode first. If any electrical current charges the pipe it also serves as a ground.
As with every hot water tank, shut the power and water supplies and drain the bottom of the tank once a year to get the residual rust out of it. To keep your tank running for years without problems, change the sacrificial anode every few years. Sacrificial anode takes the brunt of the rust so the inside of the tank does not. Companies will NOT tell you this, so they can sell you another hot water tank.