0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How does the plunger fit into a sillcock?
To fit the plunger into a sillcock, turn the gray plastic cover counterclockwise. Then loosen the blockage to fit the plunger tightly onto the sillcock.
What is the difference between a sillcock valve a boiler valve and a hose bibb valve?
They are just about the same
Are anti-syphon valves freeze proof?
No, mine froze and broke at about 22 degrees Fahrenheit yesterday.Terminology: -- A valve that exits a house, and is meant to attach to a garden hose, is called a Sillcock.-- If the sillcock is manufactured to resist freezing in the winter, it is sold as Frost-proof. Note that they only resist freezing -- they are not freeze proof.-- An Anti-syphon (also spelled Anti-siphon) mechanism prevents water outside the house (for instance if the other end of the hose is immersed in a pond or swimming pool), from accidentally being sucked backward into the house's plumbing. [This can happen when there is a dramatic change in water pressure, such as when someone flushes a toilet. You do not want pond water mixing with your drinking water.]There are two parts to the design of a frost-proof sillcock, that make it able to survive freezing weather without bursting.First, the entire unit is very long, typically 8" to 12". Although the handle that operates the sillcock is outside the house, the valve itself is all the way at the other end -- deep inside the house. This means the heat from inside the house should be warm enough, the valve itself will never freeze.Second, the sillcock is fitted with an anti-syphon mechanism. If you shut off the valve, and remove the hose, all the water in the sillcock will drain out. That means the entire sillcock will be empty. There will be no water inside that can freeze.Good in theory, so why are they not freeze proof? 1) The house must be heated. If the valve is in an unheated part of the house such as a crawlspace, or the building is entirely unheated, the valve will freeze. 2) The sillcock has been insulated. If you put insulation around any part of the sillcock, you will block the heat of the house away from the sillcock. The cold weather outside will chill the pipe and eventually freeze it. 3) The sillcock was installed wrong. It must be tilted slightly, so that water will drain out when the hose is removed. If the water doesn't drain out, it will eventually freeze. [This is what happened in my case.] 4) The hose was never removed. Before freezing weather begins, you must remove the hose from the sillcock, and let the water drain out. If the hose remains, water also remains inside the sillcock, and it will freeze.If you recognize any of the above problems, you must take further action to prevent freezing. All pipes that exit a house, must have a separate valve that can shut off the water. Before freezing weather begins, check along the length of the pipe and find the shut-off valve. Close it off. Go outside, open the sillcock, and let the water drain out, all the way back to the shut-off valve. [Sometimes, the shut-off valve will have a small thumbscrew built into it to help drain the water. After you close off the valve, loosen the thumbscrew until air enters the valve and releases the water to drain.] When there is no water in the pipe, it will not freeze.You may wonder, how will you know when freezing weather will begin, before it begins. Remove your hoses after the season's first frost. That's when the leaves drop, and pretty much everything in the garden dies. The sillcock is frost-proof, so you can wait that long. Just not much longer.
How do you use a sillcock frost free valve?
To use a sillcock frost-free valve, first turn off the water supply to the valve. Then, open the valve by turning the handle counterclockwise to allow water flow. After use, close the valve by turning the handle clockwise to stop water flow and prevent freezing in cold weather.
