Only if the curb stop was manufactured with a drain built in. This type of valve is also known as a "Stop and Waste"
The fill valve (ball valve UK) is siezed or clogged. As the water level rises, the float-ball rises and closes the valve when the water reaches the proper level.
If a globe valve is the same as a ball valve and your question is how does it work to stop the flow of water? There is a ball inside the valve that has a hole through the center in the same direction as the handle. When you turn the handle, the hole closes and seals against the sides of the valve.I Globe Vavle is not the same as a Ball Valve. A Globe Valve has a disc that closes an opening and can be used to throtle the flow. A Ball Vavle is as described above. The Globe Vavles usually have a wheel type valve handle and a ball valve has a lever type handle.
You have to disassemble the valve and replace the springs and cup seals, and maybe the ball.
A ball valve.
no
The ball ceramic valve evolved from the plug valve, in which there is a plug initially. The ball valves also can be divided into floating ball valve and fixed ball valve. The differences between floating ball valve and fixed ball valve are as follows. For the fixed ball valve, the ball is fixed and will not move even under pressure. There are floating valve seat to press the sing real tightly on the ball when suffering the media's pressure. Besides, the axletree is equipped with the stem connecting with the ball. The floating ball valve contains the ball floating inside. The structure is simple and has good tightness. When the media goes through, the pressure is passed into the seal rings, therefore the material of the seat rings should be well considered in design.
A ball valve is a contrivance by which a ball, placed in a circular cup with a hole in a bottom, operates as a valve.
what you should do is slowly turn the ball valve up until you hear the water stop. then slowly turn it all the way on. If it doesen't come on then there is probably another valve that needs turned on.
A ball valve is used to turn water , gas or oil on and off.
Ball valves are quarter-turn on/off devices. A pivoting ball in the center of the valve controls the flow of liquid or gas media. The pivoting ball is known as a rotary ball, and it is designed with a hole (a bore) in the center. A stem on the top of the ball rotates the ball to open or close the valve. D Chel Valves are the Top Ball Valve Manufacturer in India.
You may need a new valve especially if you have tried or have succeeded in moving the valve position while the pump was running.