It is the casing that the thermostat fits into. Normally called a housing.
The Complete Thermostat Assembly must be replaced as a unit It CANNOT be dissembled!! Replacement assembly’s are available from “http://www.daewoous.com/”
# Drain the radiator below the thermostat level # Remove the water outlet elbow assembly from the engine and the remove the thermostat
The thermostat on a 2005 Kia Sedona is located on the top of the radiator. To access the thermostat, you will need to remove the upper hose assembly.
the thermostat is under the air assembly,monted onto the cylinder head.there are three screws holding the thermostat,remove screws,dissconnet the housing and pull the thermostat out.Assembly is the reverse steps the thermostat is under the air assembly,monted onto the cylinder head.there are three screws holding the thermostat,remove screws,dissconnet the housing and pull the thermostat out.Assembly is the reverse steps
To change the thermostat on a 1987 Chevy van, drain the radiator and locate the thermostat under the upper host assembly. Remove the bolts holding the thermostat in and replace it.
The 1998 Toyota hi-ace with the 2.4-liter gasoline engine is equipped with a standard style spring-loaded thermostat assembly. The thermostat, housing and gasket assembly are easily accessible directly to the right-front of the valve cover.
To replace the thermostat on a 2002 Cavalier 22 Ecotec, drain the radiator and remove the upper hose assembly. Replace the thermostat and refill the radiator.
Follow the top radiator hose from the radiator to where it connects to the front of the engine . Your thermostat is behind the water outlet assembly
To replace a thermostat on a 2000 Ford F-250 V10, drain the radiator. Locate the thermostat on the top hose assembly and remove the screw. Replace the thermostat and refill the radiator.
To change the thermostat on a 1973 Ford Mustang with a 302 engine, drain the radiator. Locate the thermostat under the upper hose assembly and remove the required bolts. Place the new part in position and replace the hose assembly before filling the radiator.
Follow the top radiator hose from the radiator . The hose connects to the engine coolant thermostat / water outlet assembly bolted to the engine . The engine thermostat is inside the housing
The thermostat is located under the throttle assembly. It is at the top end of the LOWER radiator hose. Gotta leave it to the Japanese, who would have thought to put a thermostat there?