Want this question answered?
energy water
No. Wind turbines capture the wind's energy and convert it into electricity.
We use wind in places like windmills, for wave energy, at sea: pushing the sail of a boat, etc.
Wind mills, sail boats, kites, birds.
you cant STORE WIND ENERGY FOR LATER USE
The kenning for "wind" is "breaker of trees".
Well you press E then P RRREEEAAALLLYYY fast. By the way it's wind BREAKER!! You're such a bad speller!
The noun wind breaker is a compound noun; a word for a type of jacket; a word for a thing.A compound noun is a noun made up of two or more words that form a noun that has a meaning of its own.A wind breaker is a jacket made from tightly woven material that resists penetration by the wind, a particular type of jacket.The compound noun 'wind breaker' is made up of the noun'wind' and the noun 'breaker'. It is not clear that one of these nouns is describing the other. It can be a matter of opinion.Note: A noun functioning as an adjective to describe another noun is called an attributive noun (also called a noun adjunct).
A breaker switch is easier to use.
Use a 30 amp breaker.
The twigs branches and leaves act as a filter for the wind and reduce the force and therefore the damage.
Depends on the wire size used in the circuit. If you use AWG # 14 wire you must use a 15 amp breaker. If it is wired with AWG # 12 wire then you use a 20 amp breaker. If a AWG # 10 wire is used then a 30 amp breaker is required. The breaker protects the wiring from overheating so you must use the proper size breaker for the wire used.
The size breaker you use is determined by the size wire used in the circuit. If you use AWG #12/2 wire then use a 20 amp breaker. If you use AWG # 14/2 then use a 15 amp breaker.
If you can reset it, then it is not a fuse it is a breaker. You use then so you do not have to replace a fuse, you can just reset the breaker.
A GE tandem breaker can be removed and replaced with a GE single pole breaker.
The breaker you use is determined by the size of the wire in the wall not by what is being connected to that circuit. If you have 14/2 wire then use a 15 amp breaker. If you have 12/2 wire then use a 20 amp breaker. The breaker protects the wiring not the item connected.
The breaker you use is determined by the size of the wire in the wall not by what is being connected to that circuit. If you have 14/2 wire then use a 15 amp breaker. If you have 12/2 wire then use a 20 amp breaker. The breaker protects the wiring not the item connected.