0
It works by moving against the air. The air's resistance creates most (or all) of the lifting force.
Lift is due mainly to the wing's angle of attack, forcing the air that the wing strikes downwards. The downward forcing of the air generates an equal-and-opposite upwards force that we call lift.
Be aware that the common and mistaken idea that lift is caused by "air moving faster over the curved top than the flat bottom" does not explain *most* of the lifting force.
If this were true, inverted flight would be impossible, as the "lift" would become "negative lift" and the airplane would plummet to the ground.
Some wings do give a small amount of lift at zero angle of attack, and this *is* due to the Bernoulli/venturi effect of differential camber.
If any lifting surface is an aerofoil, then some *do not* have differential camber (top and bottom curvatures).
There are *symmetrical* aerofoils (same top and bottom convex camber) flat ones (paper planes) and membranes (hang glider wings, parasails and kites).
To see this, go to http://en.wikipedia.org/wiki/Aerofoil, check out the "lift and drag curves for a typical aerofoil" graphic.
Wiki User
∙ 10y ago
Wiki User
∙ 9y agoAn aerofoil or airfoil is the curved shape of an airplanes wing. Airplane's wings are different for each aircraft depending on its size and speed and function. The curvature of the top of the wing and the bottom are different and the shapes of the aerofoil were categorized and identified using NACA numbers. They were identified and registgered with their specific shape characteristics with the National Advisory Committee for Aeronautics (NACA), founded in 1915.
Wiki User
∙ 14y agoIt works like an airofoil on an aroplane. It uses the bernuli effect, as water moves faster over the top of the hydrofoil it reduses pressure causing lift. This lift causes the boat to lift out of the water.
Wiki User
∙ 12y agoAn airfoil is a blade that has an unequal cross section so that, as it passes through the air, the air it divides takes two paths of different length. The path of longer length has lower pressure on it than the path of shorter length. This causes lift, in the direction from higher pressure (shorter path) to lower pressure (longer path).
Wings, propellers, and turbine blades all have an airfoil cross section so that they can generate their own unique type of lift, or thrust, as the case may be. Angle of attack is part of this equation, but the airfoil is primary in making it all work effectively together.
Wiki User
∙ 11y agoThe air shear going under the wing when flaps are down pushes the plane up off the ground. The reason why planes have wings up is to create low drag and high lift.
Wiki User
∙ 8y agoAn aerofoil is another name for an airfoil, a structure shaped to produce lift when moving in air.
Add your answer:
Earn +20 pts
What type of blades Parson's reaction turbine has?
only moving blades
Why axial flow turbines blades are twisted?
The blades of an axial flow turbine have the aerofoil shape... Also,for the axial flow turbines... Vf1=Vf2 The water strikes the blade surface at the same time from the root to its tip and a stream of water will leave the water at the correspondin trailing edge. Therefore,for inlet to outlet,the radius and blade velocity will be the same,BUT the blade velocity will be different at different sections of the blade due to variation in the radial distance,which implies that the velocity triangles for each section of the blade will be different.In order to achieve shockless flow,the inlet and outlet triangles of a blade must vary from root to its tip,and therefore,axial flow turbine blades are twisted...
How do you grind tct blades?
What materials of the Blades is? If you need to grind Tungsten Carbide Blades, the Diamond Grinding-wheels should be your Best Choice. If you need to grind High Speed Steel Blades, Alloy Steel Blades or other steel blades, CBN Grinding-wheels should be your good choice. YingLong SuperHard Materials Manufactory is factory of Typed Grinding-wheels.
What are wind turbine blades built from?
Newer blades are made of aluminum and composite materials
High pressure steam turns the blades of?
High pressure steam hits the blades of a TURBINE and turns its shaft.
Can you make rotar blades using a PVC pipe?
No, they must have an aerofoil shape.
What is the coefficient of lift for aircraft powered by 320HP single aircraft engine with 3 blades?
This is a meaningless question: coefficient of lift has nothing to do with engine power or number of propeller blades - it's a function of aerofoil type (section), dynamic pressure and reference area.
How do high speed fighter planes fly without aerofoil shaped wings?
High-speed fighter planes have aerofoil-shaped wings.
What is the darrieus rotor?
The Darrieus wind turbine is a type of vertical axis wind turbine (VAWT) used to generate electricity from the energy carried in the wind. The turbine consists of a number of curved aerofoil blades mounted on a vertical rotating shaft or framework.
How wind is captured in a wind turbines?
The wind is captured by the blades of the wind turbine, which are aerofoil shaped. The force drives the blades which are precisely angled by a computer system to make the most efficient use of the available wind. The rotating motion of the blades attached to the hub, drives a gearbox which increases the rotating speed from the hub. The output of the gearbox spins a 3 phase generator at high speed that is computer matched to the existing grid frequency, supplying it with power.
How wind is captured in a wind turbine?
The wind is captured by the blades of the wind turbine, which are aerofoil shaped. The force drives the blades which are precisely angled by a computer system to make the most efficient use of the available wind. The rotating motion of the blades attached to the hub, drives a gearbox which increases the rotating speed from the hub. The output of the gearbox spins a 3 phase generator at high speed that is computer matched to the existing grid frequency, supplying it with power.
Why do wings keep a plane in the air?
As the plane flies through the air, the upper surface of the wing, or aerofoil, is so curved that it creates higher air speed and lower pressure. In other words this lower pressure gives an upwars"lift" to the aerofoil, wheras the air rushing under the aerofoil creates higher air pressure giving an upward "push" to the aerofoil. So both surfaces create upward forces.
How air plane was flying?
This is due to the shape of the aerofoil and propulsion
How air plane fly?
This is due to the shape of the aerofoil and propulsion
How aeroplane fly?
aeroplane have aerofoil shape (you could find in the internet how does it looks like)wings that have a specific shape that would make it fly. The high velocity at the top of aerofoil will create the low pressure and the low velocity below the aerofoil will create high pressure. thus, the high pressure will push the aeroplane upwards.
What is the term used to describe the curvature of an aerofoil?
The camber is the term used
What is a synonym for airfoil?
OrganDevice of flightIn Europe it is also called an aerofoil.
