Amplitude?
The distance between maximum and axle in a graph.
The word aptitude means the ability to do things naturally. Most organizations will give out some aptitude tests before hiring someone.
The maximum distqnce through which the vibrating body displace in directions is called the
its the level of noise
High aplitude (Kanay washere)
Wavelenght, aplitude, frenquency, and speed.
well, it will look all wavy, reaaal wavy. very high amplitude
im too dumb -_-
No. Aplitude is the height of the wave. Frequency and wavelength can be used to calculate the speed of the wave by multiplying them together (if the units are appropriate).
The Amplitude of a sound is it's loudness. It is possible to convert a sound wave into a transverse wave and see it on a CRO. (Cathode Ray Oscilloscope) A quiet sound has a low aplitude and a loud sound therefore has a high amplitude.
Aplitude ModulationAn AM transmitter is a Amplitude Modulated transmitter where the amplitude of the Radio Frequency signal is modulated, usually used in the lower frequency bands where the frequency is to low for Frequency Modulation (FM), it was the first type of modulation used in radio communication FM was developed in the late 1950's and is not sensitive to static interference as AM AnswerAM is Amplitude Modulation that is the RF signals amplitude is modulated with the audio signal. this modulation is done because the audio signal being of low frequency cannot be transmitted to longer distance so the audio signal is amplitude modulated with RF signal and then transmitted into the air
Loudness is affected by parameters other than sound pressure, including frequency and duration. In acoustics volume is related to amplitude, sound pressure, and dynamics.The loudness of a sound can be measured by a sound pressure level meter. It belongs to psycho acoustics.Loudness is a subjective measure, which is often confused with objective measures of sound prtessure such as decibels or sound intensity. Filters such as A-weighting attempt to adjust sound measurements to correspond to loudness as perceived by the average human. However, as the perception of loudness varies from person to person it cannot be universally measured using any single metric.There is subjectivly perceived loudness (volume), objectively measured sound pressure (voltage), and theoretically calculated sound intensity (acoustic power).Scroll down to related links and look at "All about loudness".
According to Merriam-Webster, the definition for silence is:"1: forbearance from speech or noise2: absence of sound or noise"