Bore 4.250"
Stroke 4.00"
bore and stroke a chevy 400 smallblock.
4.310 bore X 4.250 stroke -- basically a 454 bored .060 over with a 1/4 inch longer stroke crankshaft as compared to the 4.250 stock bore size and 4.000 inch stroke of a 454. Just as an aside FYI, 427's have the same stock bore size as a 454's but have a 3.760 stroke.
You can't... There's not enough steel in the cylinders to bore it that far. If you want a 454, you need to by a big block 454 Chevy engine.
BORE is 3.740 and the stroke is 3.480
4.312 bore x 3.50 stroke.
4.00 bore 3.48 stroke
The bore would be 4.310" and the stroke is 4.00"
You can get a 454 c.i.d. small block Chevy with a 4.185 in. bore and 4.125 in. stroke on an aftermarket block with a raised cam
No. The bore, and stroke determine the cid. And they are different on these two motors. The 454, has a longer stroke.
4.310
4.000 inches -- same bore size as a Chevy 350, the difference is a 327 uses a 3.250 stroke and the 350 uses a 3.480 stroke.
4.25X4.56