Insulation of laminated core is required to reduce the circulating current points due to touching the two plates. This results in more iron loss and heat produced
It is to reduce circulating current losses on winding.
It will limit the amount of circulating current that will develop in the core if you have an inadvertent core ground.
putting cells in series gives you a higher voltage but at the same current rating. putting cells in parallel gives you the same voltage but at a higher current rating. series parallel can give you both..
since at no load only excitation current(responsible for core loss ie iron loss) flow on the primary side so core loss current will be 1A and core loss = v1*i1*powerfactor. core loss = 1*11000*0.24= 2640watt.
mass
teeth
Eddy current loss in Transformers is because of the eddy currents formed in the body of the magnetic core.Whenever a conductor(iron core) exposed to a changing magnetic field a magnetc field produced in the body of the magnetic core.That induce a circulating current in it.Which is called eddy current.In the case transformer it is loss.But it is useful in other purposes.
Insulation of laminated core is required to reduce the circulating current points due to touching the two plates. This results in more iron loss and heat produced
It could be a convection current.
Borons current loss is B10 and B11
AD current loss could refer to a comic, called Eddy Current. It could also refer to AD loss, memory loss caused by Alzheimer's Disease.
If it is current circulating money, about 9 cents.
To prevent for circulating the magentising current.
AD current loss could refer to a comic, called Eddy Current. It could also refer to AD loss, memory loss caused by Alzheimer's Disease.
Convection.
It is to reduce circulating current losses on winding.