0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the cylinder compression for a polaris 1996 425 magnum 4x4?
The cylinder compression, for your Polaris ATV, is 14 to 1. The cylinder compression usually decreases as the vehicle gets older.
Ford 2.9 compression lbs per cylinder?
What is the cylinder compression on a 1991 Ford Ranger with a 2.9?
Where is cylinder 8 in a 2002 F150 4.6?
The Ford F150 was produced from the years 1948 to present in the United States. The cylinder 8 in a 2002 F150 4.6 is located against the driver side firewall.
Do you need a new engine if there is no compression in one cylinder?
Depends on why there is no compression.
How can you repair low compression in cylinder?
how to fix a cylinder #1 has low compression diagnose on 2.9 chvy colorado 2007
95 Ford Ranger 4-cylinder 8 spark plug compression test?
pounds of compression per cylinder
Where is cylinder number 1 on a ford F150 4.9 6-cylinder?
cylinder # 1 is the front cylinder on your straight 6
Can you tell me the Location of temp sender on f150 six cylinder engine?
can you tell me the location of the coolant temperuture on a 1996 f150 4.9 six cylinder engine
What is the horsepower of f150 6-cylinder?
202 hp
What causes oil to come throu air breather on 94 ford f150 300 inline 6 cylinder?
worn rings , low compression , cylinder bore taper, cracked pistons , cracked cylinder heads between head gaskets, could be many things causing oil to many things breather
Setting timing on a 1995 F150 4.9 6 cylinder.?
setting timing on a f150 4.9 6cyl
What causes no compression to just one cylinder 5 Got a 98 Explorer that has fuel and spark but no start Tested compression by hand and 5 has NO compression Reasons why Repairable?
bad valve, bad rings or head gasket. need to do a leakdown test and see where the cylinder is leaking. do a copression test with adding a tablespoon of oil in the plug hole. if you get some compression, it's rings. have same problem with 5.0 in f150. mine bad rings on one cylinder. probable cause would have started with a bad injector leaking fuel and washing oil from the cylinder. then on restart that bore would not be lubed causing premature ring wear. at 150k, time for a new engine.
