The cathode ray tube uses a beam of electrons to paint a phophoresent screen. It has to first pass by electrical steering plates. Depending on the voltages on these plates the beam goes as directed. There are systems that use coils.
From figure
V1T = V1 sin θ1,
V2T = V2 sin θ2
But V1T = V2T
V1 sin θ1 = V2 sin θ2
Or V2/V1 = sin θ1 / sin θ2
Using electric field charged particles could be streamlined and this is known to be electrostatic focusing.
Hivg5yryduhbyh
Cathode ray tube amusement device was created in 1947.
The negatively charged electrode of a cathode ray tube (CRT) is the cathode. The tube is a cathode ray tube, and electrons stream off the cathode, are accelerated across the evacuated space and "directed" either electromagnetically or electrostatically, and then strike the phosphor coating on the positively charged anode at a "location" determined by the "directing" elements.
It is not necessary in a cathode ray tube, it is a side effect and is needed in the calculations to ensure that there are no errors.
no
William Crookes invented cathode ray tubes.The earliest version of the CRT was invented by the German physicist Ferdinand Braun in 1897.
JJ Thomson discovered electrons using a cathode ray tube.
A "CRT" is a cathode ray tube. An old style computer monitor (not computer).
Electrons.
The cathode ray tube was invented in 1897 by Ferdinand Braun.
because cathode ray tube is the heart of the television.
Cathode ray tube amusement device happened in 1947.
J.J Thomson conducted the cathode-ray tube experiment in 1911.
Cathode ray tube amusement device was created in 1947.
None of these appliances use a cathode ray tube. Older type TVs used a cathode ray tube, its common name was the picture tube.
The cathode ray tube was not discovered it was invented by Ferdinand Braun
The negatively charged electrode of a cathode ray tube (CRT) is the cathode. The tube is a cathode ray tube, and electrons stream off the cathode, are accelerated across the evacuated space and "directed" either electromagnetically or electrostatically, and then strike the phosphor coating on the positively charged anode at a "location" determined by the "directing" elements.
Probably a mis-spelling of "cathode ray tube".