Force feed lubrication systems are designed to accurately deliver, monitor, and protect oil delivery to pumps, compressors, or any other critical equipment. A system is usually comprised of a divider block which automatically directs the oil to several points, a lubricator pump to deliver the oil under sometimes very high pressure, and a computer to monitor the flow of the oil, to give totals, averages, alarms, etc. For example a reciprocating compressor may need oil delivered directly to the piston area itself. This would require generating enough oil pressure to overcome what ever gas pressure may be at the piston area. Sometimes several hundred to a few thousand psi may need to be produced by the force feed lubricator.
In a mechanical system such as surface to surface movements or a mechanical seal normal lubrication does nor penetrate in the gaps where lubrication is essential due to force / pressure in the mating part or seal. Lubrication in this case is forced into the joints by applying pressure resulting in forced penetration of lubricant.
Mist lubrication system is that, in which the lubrication of a bearing is done by the oil in the form of oil mist.
Splash lubrication like in small engines uses a dipper connected to the crank that " dips " into the oil on the down stroke and " splashes " it up and onto the engine parts on the upstroke. Pressurized lubrication uses a pump to push the oil through passages to the needed areas.
orthogonal cutting is a 2D cutting having 2 forces i.e cutting force and feed force where as oblique cutting is a 3D cutting having additional force i.e radial or passive force.
I Dont exactly know but got somthing to do with splash lubrication.
Full Force Feed
gravity feed lubrication is when the lubricant is pumped to the top of the object needing lubrication, and falls on top of the object, covering it and lubricating it. An example would be a wet sump car engine.
Oil pumps have a spring operated regulator and the spring's tension determines the max oil pressure.
No you cannot force feed any animal.
gravity feed lubrication is when the lubricant is pumped to the top of the object needing lubrication, and falls on top of the object, covering it and lubricating it. An example would be a wet sump car engine.
In a mechanical system such as surface to surface movements or a mechanical seal normal lubrication does nor penetrate in the gaps where lubrication is essential due to force / pressure in the mating part or seal. Lubrication in this case is forced into the joints by applying pressure resulting in forced penetration of lubricant.
you cant
you could either force feed it or feed it something good
force feed it
No, a prison guard can not force feed an inmate. Only a doctor would be able to do that.
When in doubt, force-feeding is usually the right thing to do
lubrication lubrication