25to1
The proper fuel mix for all Husqvarna two cycle engines is 50:1 or 2.6 oz of oil per gallon of unleaded 89 octane or higher gasoline.
50:1
Go 50:1.
Need to know the fuel oil mix for craftsman chainsaw Model #917.353736.
40:1
The mix ratio is 50:1, but be sure to use a good 2 cycle oil such as Husqvarna's or Echo's. Do use a motor boat or motorcycle 2 cycle oil. Those are not rated for the small engines like used in the 141 chainsaw. Best bet is to buy the oil at a reliable mower shop.
50 to 1 2.6 oz oil to 1 gal. gas
1/2 pint oil each gallon of gas.
To mix gas for a chainsaw, combine the appropriate ratio of two-stroke engine oil with unleaded gasoline in a clean container, typically a 50:1 ratio (check your chainsaw's manual for specifics). After mixing, fill the chainsaw's fuel tank carefully, ensuring not to overfill. Use a funnel if needed to avoid spills, and make sure to securely close the fuel cap afterward. Always run the chainsaw in a well-ventilated area to avoid inhaling fumes.
The Husqvarna 265RX requires a fuel mix ratio of 50:1, which means you should mix 2.6 ounces (75 ml) of two-stroke engine oil with one gallon (3.8 liters) of unleaded gasoline. It's important to use high-quality, oil specifically designed for two-stroke engines to ensure optimal performance and longevity. Always check the owner's manual for any specific recommendations or updates regarding fuel mixtures.
The 451 is a 25:1 mix or 5.12 oz of oil to a gal of gas.
Mix 1/2 pint (8oz.) for every gallon of gas. 16:1 Ratio