0
Axial displacement is the motion along the shaft of the turbine caused by the force exerted by the steam or by the thermal expansion of the shaft and casing.
Wiki User
∙ 11y ago
Wiki User
∙ 11y agowhat is axial displacement steam turbine
Add your answer:
Earn +20 pts
Where thrust bearing located in steam turbine?
The thrust pads will be there at the front or non drive end of the turbine side....These are usually used to limit the axial displacement of the rotor( Means to minimize the movement of rotor axially in order to maintain the axial clearance between the moving blades and the fixed blades of steam turbine rotor).....
Why tripping value of axial shift of steam turbine is more than turbine rotor float?
axial shift depends upon the gap between rotot blade and fixed blade , not on float
What is balance piston line of Turbine?
it is used balance axial thrust on turbine rotor due to admitting of high pressure steam in to turbine. it basic purpose is to save thrust bearing.
Reasons of positive axial shift in steam turbine?
Sudden change of load Sudden drop of vacuum Sudden drop of Main steam temperature.
What is the length of an blade for a gas turbine?
The length of a blade depends on the style (impulse or reaction), the overall size of the turbine, whether it is an axial flow or radial flow turbine, and where the blade is located within turbine of an axial flow turbine. One thing that is constant: the length of the blade increases from the steam or gas inlet to the discharge of the unit. The profile will gradually increase in diameter from inlet to discharge.
What is positive axial displacement of steam turbine?
axial shift of a steam turbine is the shifting of turbine rotor in the forward and backward direction due to steam thrust on blades of rotor.
What is use of thrust pad in steam turbine?
Thrust pads are used to protect the steam turbine rotor from damage due to axial displacement due to axial thrust created by entry of steam in the turbine. generaly the pads clearence is 0.45mm for a bearing size 250mm.
Where thrust bearing located in steam turbine?
The thrust pads will be there at the front or non drive end of the turbine side....These are usually used to limit the axial displacement of the rotor( Means to minimize the movement of rotor axially in order to maintain the axial clearance between the moving blades and the fixed blades of steam turbine rotor).....
What is difference between radial flow turbine and axial flow turbine?
in a radial flow turbine the steam enters the turbine in the direction of its radius and leaves it in the direction of the axis of the shaft. in a axial flow turbine the steam enters the turbine in the direction of the axis of the shaft and leaves the turbine in the same direction.
Why tripping value of axial shift of steam turbine is more than turbine rotor float?
axial shift depends upon the gap between rotot blade and fixed blade , not on float
What is Steam turbine T S I system?
The TSI system is Turbine Supervisory Instrumentation system, consists of multiple instruments, including speed sensors, speed monitors and so on. The system continuously monitors the steam turbines of all important parameters, such as: rotational speed, overspeed protection, eccentricity, shaft vibration, cover vibration, axial displacement, differential expansion, and thermal expansion. The system helps to improve the availability of steam turbine unit.
What is balance piston line of Turbine?
it is used balance axial thrust on turbine rotor due to admitting of high pressure steam in to turbine. it basic purpose is to save thrust bearing.
Reasons of positive axial shift in steam turbine?
Sudden change of load Sudden drop of vacuum Sudden drop of Main steam temperature.
What is the purpose of fixing a dummy piston and cylinder in steam turbine rotor?
Dummy piston is provided to oppose the axial thrust generated (in the direction of steam) due to incoming steam.
What is the length of an blade for a gas turbine?
The length of a blade depends on the style (impulse or reaction), the overall size of the turbine, whether it is an axial flow or radial flow turbine, and where the blade is located within turbine of an axial flow turbine. One thing that is constant: the length of the blade increases from the steam or gas inlet to the discharge of the unit. The profile will gradually increase in diameter from inlet to discharge.
Why to out bleed steam in turbine?
When steam contains liquid droplets while doing work at high temperatures, the water droplets can etch metal. To combat this, steam can be superheated or the pressure of the system is reduced.
How does a Ljungstrom steam turbine work and look like?
Ljungstrom Turbine is a Radial Outflow Steam Turbine with two counter rotating discs. Blades are mounted in circles one bigger than the other. Blades of one rotor work as nozzles for the other rotor blades. This turbine design is very forgiving on wet steam. It is said that the turbine design had limitations on scaling up above 30 MW and hence could not compete with Axial Flow Turbines.
