A force variable meter is a kind of electrodynamometer development when it is made with two mobile curls set at right edges to one another. The strategy for association of this sort of force component meter, in a 3phase circuit. The two stationary loops, S and S1, are associated in arrangement in Phase B. Curls M and M1 are mounted on a typical shaft, which is allowed to move without limitation or control springs. These loops are associated with their arrangement resistors from Phase B to Phase An and from Phase B to Phase C.
100 cm. = 1 meter. To convert from centimeters to meters, divide by 100.
Because you have been informed wrongly. It is impossible to convert square metres to linear metres.
Prefix 'centi' is used to denote sub multiples of meter and uses factor 10-2 or 0.01 In order to convert meters to centimeters, value of meters has to be divided by factor used with prefix 'centi': 1 meter = 1 / 10-2 = 1 / 0.01 = 100 centimeters
1 cubic meter = 1 kilolitre
The conversion factor is approximately 10.764 square feet per square meter. This is derived from the conversion 1 meter = 3.2808399 feet.
Power Factor Meter
power meter,power factor meter, frequency meter, volt meter ,watt meter ,voltage ampere meter,
Multiplication factor can be derived from Meter CT, Meter PT, Connected CT and Connected PT values.
divide by 10001 meter = 1000 millimeters 1 millimeter = 0.001 meter
power factor meters are connected across the supply
bunny rabits edit : Current usage
In a distortion factor meter the filter at the front end is used to suppress which type of hormonics
multiplying factor = Line CT Ratio / Meter CT Ratio Usually it is mentioned on Meter that MF = 1 if CT Ratio is 200/5 or MF = 2 if CT Ratio is 400/5. There can be an additional multiplication factor that would be mentioned on the meter.
A wattmeter reads the true power of a load, regardless of its power factor.
X 1000 1 meter = 1000 millimeters 1 millimeter = 0.001 meter
Prefix 'centi' is used to denote sub multiples of meter and uses factor 10-2 or 0.01 To convert meter to centimeter, value of meters has to be divided by factor used with prefix 'centi': 1 meter = 1 / 10-2 = 10 / 0.01 = 100 centimeter
Yes. Milli means a factor of 0.001.