Fifty millionths of a farad, abbreviated as 50 uF. Farad is the unit of capacitance. 50 microamps DC flowing for 1 second will charge a 50 uF capacitor to 1 volt.
The microfarad is a unit of capacitance, equivalent to 0.000001 (10 to the -6th power) farad. The microfarad is a moderate unit of capacitance. In utility alternating-current (AC) and audio-frequency (AF) circuits, capacitors with values on the order of 1 µF or more are common. At radio frequencies (RF), a smaller unit, the picofarad (pF), is often used. This unit is equal to .000000000001 (10^-12) µF.
30 microfarads
It is a rating that is used to size capacitors in microfarad. MFD is an acronym for the word microfarad.
1000
A: I hope you mean replace. The answer is yes provided that the voltage rating is the same or more then the original.
A microfarad measures electrical capacitance. A farad can be defined as the charge in coulombs, which is 1 ampere per second, that a capacitor will accept for the potential across it to charge one volt. A microfarad is equal to one millionth of a farad.
30 microfarads
It is a rating that is used to size capacitors in microfarad. MFD is an acronym for the word microfarad.
On the list that you posted with the question, there are no items that designate a 7 microfarad capacitor.
1000
1K = 1uF
1000000 microfarad
Type alt + 230
To repair a 680 microfarad capacitor, buy a new one and install it in place of the old one. It is unrealistic to attempt repair of a capacitor.
It should work okay as long as voltage rating is equal to or greater than the capacitor you are replacing.
uF is a measurment in electronics called Microfarad. You will typically see uF on Capacitors for example 400Volt 150uf would be a capacitor rated at 400 volts and 150 microfarad.
A: I hope you mean replace. The answer is yes provided that the voltage rating is the same or more then the original.
No, the value is far too small. If it is the capacitor used for the timing, the time/s will be reduced to one tenth of the deisred value.