A fractional part of an inch. ie. one thousandth (1/1000)
1 thousand it is called a thou because it is short for thousandth
one thousandth of an inch = 0.001 " Say you need to subtract 6 thousands of an inch (6 thou) from 1.875 " Then its 1.875 - 0.006 = 1.869 "
A gap of 12 thou refers to a measurement of 12 thousandths of an inch. To convert this to millimeters, you can use the conversion factor where 1 inch equals 25.4 millimeters. Therefore, 12 thou is approximately 0.3048 millimeters.
No, 40 thousandths of an inch is equivalent to 1.016 millimeters.
16.8 mm = 0.0168 thousand mm Unless you meant thousandths of an inch (thou): 0.0254 mm = 1 thou → 16.8 mm = 16.8 ÷ 0.0254 thou ≈ 661 thou
a twelfth (1/12) of a foot or a thousand (1000) thou.
the gap is .060 thou of inch.
The smallest Imperial measure of length is the thou, also known as a mil, which is equal to one thousandth of an inch (0.001 inch). It is commonly used in various engineering and manufacturing applications to specify very small measurements.
A mil, otherwise known as a thou, is equal to one thousandth of an inch. Therefore, 80 mil is equal to 80/1000 = 0.08 inches.
one inch is one inch; one inch dia refers to one inch diameter of a circle; it is still one inch
YES can go up to 21 inch not much rubber thou. I got 18's on mine 2000 intrepid
1 inch = 25.4 mm 1/1000 in = .0254 mm 6/.0254 = 236 thou