The output shaft sensor signal is used to determine the speed and rotation of the shaft. The allows for monitoring of performance and efficiency.
No
where is the output shaft speed sensor located on a 2001 Kia Optima?
P0722 - No signal from Output Shaft Speed Sensor . The output shaft speed sensor failed to provide a signal to the PCM upon initial movement of the vehicle (damaged OSS connector / damaged OSS sensor , or not installed properly / Harness intermittently shorted or open ) P0723 - Output Shaft Speed Sensor circuit intermittent failure . The Output Shaft Speed Sensor signal to the PCM is irregular or interrupted ( Harness connector not properly seated / harness intermittently shorted , or open / harness connector damaged / OSS sensor damaged , or not installed properly - verify harness and connector integrity - verify OSS sensor proper installation )
Above the transmission output shaft. There's a quick connect which goes to the speed sensor.. you can take the speed sensor out with a ratchet and socket.
It reads the speed of the output shaft.
It measures the speed of the output shaft.
on the output shaft of the transmission, close to where the drive shaft enters
It reads the speed of the output shaft.
The output shaft speed sensor is located on theÊABS computer unit. TheÊABS unit is found on the front wheels.Ê
It reads the speed of the output shaft. On a transmission it is used for shift timing.
under the passenger side of the vehicle and look up. You will see The output shaft speed sensor codes maybe similar to P0720>
The transmission computer takes the output speed sensor signal and sends it to the cluster for the speedometer reading. The output speed sensor is a likely cause.The transmission computer takes the output speed sensor signal and sends it to the cluster for the speedometer reading. The output speed sensor is a likely cause.