0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Does a low bandwidth signal have more power than a high bandwidth signal?
A low bandwidth signal does not have more power.
What are the advantages and disadvantages of binary phase shift keying?
One advantage is more bandwidth. A disadvantage is that the transmitted power is lower.
How 3db dandwidth equals half power bandwidth?
"3 dB" is a nickname for "1/2 power". "1/2 power" in dB = 10 log(1/2) = 10 (-0.30103) = -3.01 dB
What is the general purpose of a bandwidth meter?
It measures the bandwidth, or amount of data, which a user has used. This is useful for companies which have limits to the amount of bandwidth they have sold, or who sell bandwidth at a price per gigabyte.
What happen if the bandwidth of signal greater than channel bandwidth?
distorttion
Does a low bandwidth signal have more power than a high bandwidth signal?
A low bandwidth signal does not have more power.
Is low bandwidth signal has more power than high bandwidth signal?
no,because generally the lower frequency side existed for lower bandwidth,and higher frequency side existed higher bandwidth,so thus we can say that lower bandwidth has generally has lower power as compared to higher bandwidth.
How do you calculate for bandwidth power saving in ssbsc?
SSBSC uses 1/2 of the bandwidth and 1/6 as much RF power as AM modulated 100% .
What is Full power bandwidth of an operational amplifier?
everyone, As far as I know the Full power bandwidth is the output bandwidth of the signal when it is made to obtain the max power from output suppose max output voltage is +/- 10 V as prescribed in the data sheet and the slew rate is 600V/u sec , then the full power bandwidth will be 600/(2*pi*10) that is 9.548 MHz
How do you find bandwidth of in multistage amplifire?
Its bandwidth is determined by the narrowest one within any stage. E.g. If the preamp's is 5MHz and the power amp is 500kHz, then the total bandwidth of the system will be 500kHz.
What is -3db bandwidth?
Bandwidth is typically measured from the two -3dB points on each end of the response curve. You find the two points where the response is -3dB (half power) and measure the distance between them. That is your bandwidth.
What are two primary communication resources?
transmitted power and channel bandwidth
What is shanon capacity?
digital bandwidth = analogue bandwidth * log2 (1+ SNR) where SNR = strenthe of signal power/ strength of noise larger the SNR it is better.
Advantages of large bandwidth?
A very usefull advantage is the exchange of SNR(signal to noise ratio) with Bandwidth... as on increasing the bandwidth the power required for transmission get reduced to a great extent.. is given by the formula SNR2 ~ (SNR1) B1/B2 AS we can see on increasing the bandwidth the SNR is reduced greatly
What are the advantage and disadvantage of SSB sc modulating signal?
The advantages of DSB-SC are that power consumption is nominal, the power from the signal can be contained in four sidebands, and the bandwidth is double the amount in the signal.
What are the advantages of SSB and DSB over AM?
advantage of SSB ic can save power..and also the bandwidth requirements
What is spectral density per unit bandwidth?
it states the power and energy of a given signal in terms of frequency
