rust inhibitor is some sort of alkali
It is. Phosphoric acid is in many rust inhibitors.
Propylene glycol, water and rust inhibitor.
The cast iron in the block is starting to rust. Drain the radiator, put in a good radiator flush solution and follow the directions, then fill the radiator with the right coolant. Since you're already having rust problems, put in some rust inhibitor. You may need to clean it again and put in more rust inhibitor after things settle down.
No. as rust is caused by the oxidation process of: O2+2H2O+4e = 4OH in sodium hydroxide the hydroxide is already present making it harder to form and therefore making rust harder to form. Sodium hydroxide is a rust inhibitor.
Normal. Bare metal will rust within a few days. Sand it, and paint it with an Rust Inhibitor primer and then paint. I recommend Krylon.
Radioactive tracing in medicine, Nuclear medicine, Corrosion inhibitor, rust preventative, and super conductor.
It prevents whatever it's blended in from freezing when it gets cold. For cars, it also doubles a little as rust inhibitor.
remove the rust by sanding or grinding. prevent future rust with an inhibitor, weld in a new piece of metal, and/or use fiberglass to fiz the hole. use a polyester fiber fill ( plastic body filler), to fill any divots. sand and prepare for refinishing.
Yes, rust can be removed with sandpaper. Sandpaper can be used to scrub away the rust, revealing the underlying metal surface. However, it's important to note that sandpaper may also scratch the metal, so it's crucial to use the appropriate grit level and technique. Additionally, after removing the rust, it's advisable to apply a protective coating like paint or a rust inhibitor to prevent further rusting.
Noncompetitive inhibitor.
ACE inhibitor
No, Depakote is not an MAO Inhibitor.