3.7 Litres.
3sfe 5sfe 3sgte
The water pump for a 3sfe engine is on the back and bottom of the engine. It is on the passenger side of the car.
HI A 3SFE engine has 140 hp
yes its an interference engine if u snap ur belt u r in trouble. the 3sfe none d4 is not an interference eng tho
toyota engines that use 25mm shims 4age 5efe 5sf3 3sfe 2vzfe 7mge 7mgte
If it has a 3sfe or 5sfe engine it is at the front of the motor (radiator side) beside the A/C compressor. If it has a 3vz v6 engine it will also be at the front but under the exhaust manifold
Yes the ST and the GT both have the 3SFE or the 3SGE. Both enignes are the same size.
no this transmission has a different bolt pattern and pilot bearing. also the half shafts will not fit properly.
On the drivers side (Australia)/ passenger side (America) at the back on the bottom of the engine. The main belt it connected to it.
I'm trying to find out, but 3sge to 3sfe is moving backwards because the ge head makes the 3s a high performace motor. ... Yes it is moving backwards but that does not answer the question. The blocks are the same (apart from year model revisions like mount moves and flywheel bolt differences). The manifolds, computer and probably engine wiring will also have to be changed.
this engine is used in many Toyota models.It is the performance engine in the two liter range it has the same block as the 3sfe but has a wide valve angle cylinder head this is where it gets its performance from. as for cars it is used in there is the mr2 sw20,celica gt4,caldinagt,t,im sure there are more but i can't think of them at the mo.Hope this helps
i believe that the st has a 4afe (1.4l) engine. if that is the case the pressure sender is below the alternator and to the left of the oil filter. if it has a 3sfe (2.0l) the sender is on the drivers side of the cylinder head on the front.