take care of the problem of induced AC field current due to armature reaction
/Omara
What motor is NOT suitable for use as a DC machine?
equation of ac machine
This describes the way the machine's armature conductors are connected relative to each other and to the number of poles. The two basic ways of connecting these conductors are called 'lap' and 'wave', but it gets more complicated, because these, in turn, can be connected 'simplex', 'duplex', 'triplex', etc.For lap windings, if there are p poles, then for:simplex: pduplex: 2ptriplex: 3petc.For wave windings, the number of parallel paths are:simplex: 1 x 2duplex: 2 x 2triplex: 3x 2etc.So, for a triplex lap winding machine with six poles, the number of parallel paths will be: 3p =3 x 6 = 18 parallel paths.
rectifyer
In simple, number of turns of armature, intensity of magnet and speed of machine are major factor affecting induced emf in dc generator. If speed is increased, voltage will be increased simultaneously. Also Voltage is greater if number of turns are increased. Electro-magnet in the poles of a DC Generator also play an important role in the induced EMF. If intensity of magnet is exceeds, voltage also increased as well.
f(x)=3x ,g(x) = x2 find gof(x)
Interpoles are similar to the main field poles and located on the yoke between the main field poles. They have windings in series with the armature winding. Interpoles have the function of reducing the armature reaction effect in the commutating zone. They eliminate the need to shift the brush assembly.
What motor is NOT suitable for use as a DC machine?
In voltage commutation process, the introduction of interpoles between main poles compensate armature mmf and reduces the effect of armature reaction.
The slip rings are the most important brush in DC machine.
swinburne's test on dc shunt machine is to predetermine the efficiency of the dc machine , but it is not accurate it is just like estimation of efficiency of dc shunt machine when it is run as a motor and a generator............................
it is a machine which operates on the dc power source.
It depends on the motor. They can be purchased with different numbers of poles. The number of poles mainly changes the speed of the motor.
05 types of dc machines
to convert the DC into DC.............
equation of ac machine
to chancel the effect of the armature reaction.