0
What is the Ideal Mechanical Advantage when a screwdriver with a handle of radius 1.2 cm is used to remove a screw in the back of a computer and the screw moves out 0.20 cm on each turn?
Wiki User
∙ 12y ago
There is no advantage whether the handle is 1.2 cm or 10 cm, the screw will still only make one revolution. The reason being is that both the screw driver and the screw become part of the whole. The only increase in the screws revolutions is if the screw driver is geared to make more than one turn of the screw.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Why is a spanner bent at an angle?
The spanner is bent at an angle so that it can easily applied or hold the grip of any 6 sides of nut to achieve the maximum mechanical advantage by moving the handle to and fro in the shortest possible space.
What is the function of integrated graphics processor?
is a separate processor used to handle all graphical information in a computer. Its separate from the CPU thus decrease its load or work
Where are the random numbers placed in slot machines?
While older slot machines used a mechanical/mathematical approach (the number of icons on each wheel, combined with the required combination of those to yield various winning matches), today's typical slot machine are completely computerized. They generate thousands of random combinations per second, and when you pull the handle (or push the button), the cycle stops and you get the number it was up to. The handle, the slowing-down of the wheels, etc., are there simply for historical purposes.
What does manhandle mean?
It means to physically mistreat someone. Often roughly.E.g: The kidnapper manhandled the boy. man·han·dle(mnhndl) tr.v. man·han·dled, man·han·dling, man·han·dles1. To handle roughly.2. To move or handle by manpower alone.manhandle - handle roughly; "I was manhandled by the police" palm, handle - touch, lift, or hold with the hands; "Don't handle the merchandise"
What does signal over range mean when shown on computer?
Signal Over Range, means that your computer is sending a signal to the monitor that it cannot handle. You may need to readjust the settings of your display. Of course this may be difficult if you cannot see what you are doing, because the display is out of range. You should be able to run the computer in safe mode, as the graphics output is much less demanding. While in safe mode, you can change the display settings and restart. If this doesn't work, you still have another option. You can uninstall the display drivers, then let Windows reinstall them for you.
What is the advantage of having a ratcheting handle on a screwdriver when working with computer hardware?
The advantage is you can use it for meticulous hardware work, such as glueing a USB drive to a computer screen or Hard Drive. Hope that helps :)
If screwdriver is used to put a screw into a piece of wood the radius of the handle is 1.8 cm and the radius of shaft is 0.6 cm what is the mechanical advantage of using the screwdriver?
MA= length over height.MA= 1.8 over 0.6Ma= 3
How do you increase the mechanical advantage of a wedge?
The spokes of a wheel are comparable to levers. Longer spokes give more mechanical advantage. Even in a wheel that is solid, and has no spokes, the greater the diameter, the greater the mechanical advantage.
A water faucet has a circular handle with radius 2.5 cm attached to a central shaft with radius 0.50 cm. What is the mechanical advantage of the faucet handle?
I got 1.3
Would a long screwdriver with a narrow handle or a short screwdriver with a wide handle be the better choice for driving a screw into a board?
i think a screw into a board a long screwdriver with a narrow handle
A mechanical violin played by turning the handle?
a mechanical violin played by turning a handle
What is the bottom of a screwdriver called?
There is the tip and the handle, I don't understand 'bottom' in a screwdriver.
An oar used to row a boat has a handle 160 cm from the fulcrum and the blade 40 cm from the fulcrum What is the ideal mechanical advantage of the oar?
4
Is a screwdriver handle magnetic?
Some are and many are not.
What is the effort arm of a screwdriver prying of the lid of a paint can?
the effort is where u put work into the screwdriver- the handle.
What are examples of advantage?
A very practical example of mechanical advantage is the use of a "cheater bar." If you find a bolt that is hard to break, simply slip a long pipe or similar object over the handle and it will apply much more torque.
Why do screwdriver has a plastic or wooden handle?
It's cheaper and lighter than a metal handle would be.
