A #2 copper wire with an insulation factor of 60, 75 and 90 degrees C is rated at 100, 115 and 120 amps respectively.
30 gauge wire is much "thinner" than 10 gauge wire. Hence, if you are using 10 gauge for an application requiring only 30 gauge, it will more than handle any current flow. However, if the application requires 10 gauge wire you cannot use 30 gauge wire.
The gauge of wire is referenced to the capacity of a wire to carry amperage and has nothing to do with the voltage. The voltage of a wire is determined by the type of insulation that surrounds the wire. The size of the wire is determined by the amperage of the load and the distance from the supply.
The maximum amperage it can carry for power transmission is .92 amps.
A wire gauge is a number that indicates how thick the wire is. A larger gauge number means a thinner wire. Gauge and diameter can be linked by looking up wire tables.
Copper or aluminum AWG. As for gauge and such, it depends on how much amperage you have running through it, and the length of wire.
Typically 30 amps.
the gauge of the wire determines how much amperage a wire can carry the insulation determines how much voltage the wire can handle
30 gauge wire is much "thinner" than 10 gauge wire. Hence, if you are using 10 gauge for an application requiring only 30 gauge, it will more than handle any current flow. However, if the application requires 10 gauge wire you cannot use 30 gauge wire.
Wire size needed depends on amperage, not watts. If you know the voltage of the power supplied you can calculate the amperage using this form of the "power formula":A = W / VThen there are tables that tell the amperage each wire gauge is capable of carrying. Just select the gauge that has the amperage rating just larger than you calculated.
20 Amp
The gauge of wire is referenced to the capacity of a wire to carry amperage and has nothing to do with the voltage. The voltage of a wire is determined by the type of insulation that surrounds the wire. The size of the wire is determined by the amperage of the load and the distance from the supply.
Wire sizes are governed by the amperage the wire is to carry. To answer this question the load current is required.
Depends on the amperage of the Jacuzzi and if it is 120 or 240 volts.
The maximum amperage it can carry for power transmission is .92 amps.
A wire gauge is a number that indicates how thick the wire is. A larger gauge number means a thinner wire. Gauge and diameter can be linked by looking up wire tables.
Yes, the smaller gauge number, the larger the wire is.
Copper or aluminum AWG. As for gauge and such, it depends on how much amperage you have running through it, and the length of wire.