answersLogoWhite
Science
Math and Arithmetic
Chemistry

What is the change between 0.05 and 0.07?

192021

Top Answer
User Avatar
Wiki User
Answered
2007-07-17 09:08:04
2007-07-17 09:08:04

The absolute difference is 0.02. In relative terms, we could say that 0.07 is 40 percent larger than 0.05. This calculated by dividing the difference of the two numbers by the lesser of the two: (0.07 - 0.05) / 0.05 = 0.02/0.05 = 0.4 = 40 percent.

To calculate the change, just find the difference between the numbers given.

0.07 – 0.05 = 0.02.

If you are supposed to find the percentage of change then,

Percentage of change = (Change * 100)/initial value.

= 0.02*100/0.05
= 2/0.05

= 200/5
= 40%

The change between 0.05 to 0.07 is 40%

Source: www.icoachmath.com



001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


.002-.005 intake and, .005-.007 exhaust


vstar650..hot.........cold intake .007-.012 .003-.005 exhaust .012-.017 .005-.007 measurements in inch thousands


.005" for the intake and .007" for the exhaust



INTAKE SOULD BE .004" TO .005" EXHAUST SHOULD BE .006" TO .007"


For the aluminum the intake valve clearance is .005 to .007 inches. exhaust valve clearance is .007 to .009 inches. Cast iron is - intake valve is .007 to .009. inches exhaust valve is .017 to .019 inches


The difference is 5 thousandths. .010 -.005 = .005


0.05 is the same as 0.050 0.050-0.005 = 0.045


With the engine at TOP DEAD CENTER (TDC) Adjust the exhuast valve to .007 and the intake to .005.


For the aluminum the intake valve clearance is .005 to .007 inches. exhaust valve clearance is .007 to .009 inches. Cast iron is - intake valve is .007 to .009. inches exhaust valve is .017 to .019 inches


005 is thicker than 003


Briggs says on a cold engine, .005 on intake & .007 on exhaust. Wider on exhaust to ensure you don't burn a valve.


.010 is thicker than .005


005 = 5 so the reciprocal of 005 = reciprocal of 5 = 1/5 = 0.2


chickorita bayleef meganium totodile croconaw feraligater cyndaquil quilava typhlosion


When you select a mission, you see a menu if you want it on operative (easiest), agent(medium), or 007(hardest). There is also 007 classic where your health doesn't regenerate and you need to obtain armour.


005% = 5% which, as a decimal is 0.05


.005 i believe this is correct. someone can change it if i'm wrong


There should be a placard under the hood listing the valve clearance. 12 and 16 valve engines Intake and auxiliary valves .007 to .009 in (.17 to .22mm) Exhaust Valves (carbureted 12 valve engine) .007 to .009 in (.17 to .22mm) Exhaust Valves (all others) .009 to .011 in (.22 to .27mm) 8 valve engine Intake valves .005 to .007 in (.12 to .17mm) Exhaust valve .007 to .009 in (.17 to .22mm)


x - 0.5% = 500x - .005 = 500x - .005 + .005 = 500 + .005x = 500.005Check:x = 500.005500.005 - 0.5% = 500500.005 - .005 = 500500 = 500So x - 0.5% = 500 when x is .005.


25.95 divided by 0.005 is 5,190.


0.005 / 2 is equal to 0.0025



The 1st decimal number is the greater


005 = 5.0 × 1000.05 = 5.0 × 10-2



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.