without knowing load, cannot say
All transformers are designed to work on AC. They do not work on DC.If you connect an inductor to DC, the current will increase until the capacity of the source or the conductance (1/resistance) capacity of the inductor and conductors is reached. Often, this condition will overheat and destroy the inductor, or destroy the source. A transformer is not an exception, as it is a form of inductor.
The source current is that current which will leave the DC regulator and travel to the load circuit connected to it. The sink current is that current which may come from the load circuit and attempt to find a path through the ground through the regulator. Generally most regulators are designed to just source current to a load and are not setup to receive current back(sink it)
With an AC and a DC voltage source in series, the DC voltage can be added to the RMS value of the AC voltage to give the effective voltage.
DC is direct current. It is characterized as a voltage or current that is constant or, more precisely, always in one direction. A battery is an example of a DC source. AC is alternating current. It is characterized as a voltage or current that is alternating, i.e. changing direction at some frequency such as 50Hz or 60Hz. The power supplied to your home from the public power utility is an example of an AC source. ac is attractive in nature while dc is repulsive .
AC servomotors require an alternating current as a power source, meaning they need to be plugged into an outlet, while DC servomotors require a direct current as a power source, meaning they can be run off of battery power.
All transformers are designed to work on AC. They do not work on DC.If you connect an inductor to DC, the current will increase until the capacity of the source or the conductance (1/resistance) capacity of the inductor and conductors is reached. Often, this condition will overheat and destroy the inductor, or destroy the source. A transformer is not an exception, as it is a form of inductor.
AC power sources are the adapter power sources. DC power sources are the direct power sources. DC stands for direct current, meaning it is a direct source of energy., and AC stands for alternating current, which means it is a secondary source of power.
An energy source commonly used for DC current is a battery. A battery generates direct current through a chemical reaction, providing a steady flow of electrons in one direction. Other sources such as solar panels can also produce DC current by converting sunlight into electrical energy.
dc supply is used for control circuit because dc current is an independent source .
Direct Current (DC) is an electric current flowing in one direction only.For the source and more detailed information concerning this subject, click on the related links section indicated below.
The source current is that current which will leave the DC regulator and travel to the load circuit connected to it. The sink current is that current which may come from the load circuit and attempt to find a path through the ground through the regulator. Generally most regulators are designed to just source current to a load and are not setup to receive current back(sink it)
DC electricity is direct current, compared to AC which is alternating current where the current is consistantly changing direction, direct current does not change direction. The main source of DC is a battery.
Power supplies can supply AC or DC current.
"dc" is direct current which is what batteries use, whereas "ac" is alternating current, which is what your household receptacle uses.
use kvl or kcl
With an AC and a DC voltage source in series, the DC voltage can be added to the RMS value of the AC voltage to give the effective voltage.
There's no correlation between the voltage, the current, and whether the source is AC or DC.