Let me first correct the question "current" here should be "tension" current is the speed of the electrons moving through the conductor and tension is the EMF that make the electrons move you cannot input current. the current is the demand of the circuit, depending on the resistance and the EMF(Electro Motoric Force) in other words, the Volts that is applied or input to the circuit.
Answer:
Any transformer can be used as a up step(inverting) or down step(converting) transformer, for instance 220V - 6V will be a converting and the 220V side will be your primary or high tension input and if you turn it around the 6V side will be your primary or low tension input.
A hi input current means a voltage source
a low input source means a current source
for the output that would be inverted
Digital voltmeter has high input impedence.
FET s have very high input impedance when compared with Bipolar transistors.
It depends on the shunt feedback resistor on the op-amp, for example with a 10k feedback resistor connecting the output to the inverting input, 1 mA input current gives 10 volts signal output. The input terminal stays near zero voltage because of the high open-loop gain of the op-amp, so the inverting input is termed a 'virtual earth'.
An inverter has a high output when the input is low, and a low output when the input is high.
No a integrated circuit IC for short is solid state and can only be destroyed by reverse polarity or shortened output or to high input tension or current No a integrated circuit IC for short is solid state and can only be destroyed by reverse polarity or shortened output or to high input tension or current
High Definition Component Video Input (Phillips Corp)
high input is for speaker level input and low input is rca jacks
The output of the AND gate is high when both inputs are high because that is the definition of an AND gate. (Ouput is true ONLY WHEN Input A AND Input B are true.)
If it is widescreen and has an antenna (RF) input.
1. more passive elements are required 2. input current ripple is high. Input current is not smooth 3. complex control algorithm
it has high input impedance
Digital voltmeter has high input impedence.
FET s have very high input impedance when compared with Bipolar transistors.
It depends on the shunt feedback resistor on the op-amp, for example with a 10k feedback resistor connecting the output to the inverting input, 1 mA input current gives 10 volts signal output. The input terminal stays near zero voltage because of the high open-loop gain of the op-amp, so the inverting input is termed a 'virtual earth'.
An inverter has a high output when the input is low, and a low output when the input is high.
Yes they have amute input on the left side
Because op amp consist differential amplifier and they posses high input impedance so that op-amp also posses high input impedance.