Density = Mass/Volume = 2.7 grams per cm3
The density is the mass per unit volume. So, the density = 27/10 = 2.7 grams/cc
It depends on the volume of the block and the mass. The equation D=M/V Density=mass/volume The answered is displayed as (answer) grams/(the units in which you measured the volume) I hope this helps.
Density = (mass) / (volume) = 27/10 = 2.7 gm/cm3 .
The mass and volume of aluminum are related by density: mass = volume x density and density depends upon temperature and pressure. Aluminum has a density of 2.70 grams per cubic centimeter in its solid state. In its liquid state, Aluminum has a density of 2.375 grams per cubic centimeter.
What is the density of a plastic block with a mass of 2.0 grams and a volume of 2.5cm3?
the mass is the 50 grams you probably need the volume volume = mass / density get the density from tables
The block has a density of 4 g/mL
This block of wood has a density of 0.6 g/cm3
density = mass / volume volume = mass / density density = 2.7 g/mL mass = 4.32 kg = 4320 g volume = (4320 g) / (2.7 g/mL) = 1600 mL = 1.6 L
Density = Mass/Volume = 24.8g/9.5cm3 = 2.61g/cm3
since D=m/v... then the density of the block of wood would be mass / volume..... mass in grams divided by volume in ml.
density is the product of mass and volume so its density will b 100 g/cm3..
Density is mass divided by volume. This block of wood is therefore 0.75g per cubic cm.
Density = Mass/VOlume = 120g/200cm3 = 0.6 grams per cm3
Convert kg to g: 4.32kg x 1000 = 4320 grams. Times density by weight = 11664 This is the volume in cm3 1 cm3 is equal to 1 ml Convert to litres, divide by 1000 11.663 L
It is 2.7 grams per cubic centimetre.
Density = Mass/Volume so Volume = Mass/Density The density of lead is 11.3 grams per cm3 so volume = 282.5/11.3 = 25 cm3
Density = mass/volume = 60/20 = 3grams/ccNote:The Physics and the math in this answer are bullet-proof, but there is no woodon Earth with even half that density. I suspect your block has a concrete center.
Milliliters (ml) are a measure of VOLUME. Grams are a measure of WEIGHT. One does not convert into the other. However, if you now the density of material being measured then the density can be used to convert between its weight and volume equivalent. As an example, water (at close to 4 degrees Celsius) has a density of 1 gram per millimeter. Therefore 22 grams of water has a volume of about 22 millimeters. Another example is aluminum with a density of 2.7 grams per milliliter. 22 grams of aluminum has a volume of 22/2.7 or 8.148 milliliters.
No object can have a density measured in grams. No object can have a volume measured in centimetres. I recommend that you review dimensions of measurements and then resubmit a proper question.
To find the average density of the can and its contentsWeigh the can of soda pop (mass) and then divide by the number of cubic centimeters in the can (volume). Density = mass/volume.To find the density of the aluminum canEmpty the can completely, weigh it, then place it in a filled liquid container to determine the volume of the aluminum. Divide as above to find the density of the aluminum (should be approximately 2.7 grams per cubic centimeter).
The density of aluminum is 2.70 grams per cubic centimeter.
The density is 2 g/cm3 (100 grams divided by 50 cm3).
Your mysterious block has a density of 10 grams/cm3 ,and that should tell you right away that it's not ice.