ThermoplastIc materials (such as polyethylene, nylon, etc ) are melt-processable, meaning that they can be heated to a melt (liquid) phase, forced into a mold, and then cooled to form a pre-determined shape. Typical processes include injection molding, compression molding, and blow molding. Thermoplastic materials can, many times, be potentially ground up and re-processed many times as there is no chemical reaction that occurs. Thermoset materials (such as epoxy, and some polyesters), on the other hand, undergo a chemical reaction and cross-linking of the polymer chains and can not be can't be ground up and re-processed.
a plastic that has aids :)
Paul E. Cope invented Thermo plastic glue also known as "Hot Glue" it is used in Hot Glue guns.
temperature sensorAnswerA thermo-voltaic junction, or thermo-voltaic pile, is used for this purpose. A thermo-voltaic junction consists of two dissimilar metals connected together; as the temperature increases, an increasing potential difference arises between the two metals. A thermo-voltaic 'pile' is a number of thermo-voltaic 'junctions' connected in series.
because of the difference in physical characteristics of thermoplastics and metals, there are corresponding differences between welding techniques for metals and thermo-plastics. in the welding of metal, welding rod and parent material become molten and fuse into the required bond to form welded joints. this is not in thermo plastics, because they are poor heat conductors , they are difficult to heat uniformly .. so diifferent methods are used to weld plastics...
thermo 1 is the hardest.
Thermo
thermoplastic
a plastic that has aids :)
thermosetting is atype of plastic which can't be recycled
Thermal setting plastic is plastic that can only be heated once and then set into the shape needed
Plastic forks and knives (Disposable utensils)
Thermo Plastic was created on 1999-10-13.
They are used for making plastic's but the plastics they make aren't biograble
Thermoplastics can be shaped easily by being cooled and heated time and time again. They suffer little degration by the heating and cooling. They are solid at room temp. Thermoset on the other hand cannot be repeatedly heated and cooled. if you try to re heat they become chared and do not re soften.
thermo can be heated and manipulated unlited timed, but set can only be heated and manipulated once
it is a thermo setting plastic if it is what you asked
The two types of plastics that start with thermo are thermoset plastic and thermoplastics plastic.hope that helps you! x