The difference between low voltage and high voltage for the same size cable is that cable size affects current carrying capacity, while power is voltage times current. As a result, the same size cable can transfer more power at high voltage than at low voltage.
This is why utility power transmission and distribution systems use high voltage. A typical transmission voltage in the US might be 69 kv, 138 kv, even 345 kv, and a typical distribution voltage in the US might by 13.2 kv.
High voltage winding in transformer is "PRIMARY"side and the low voltage winding is "SECONDARY" side and viceversa according to the transformer.The Primary side can STEP-UP or STEP-DOWN according to the transformer type.The frequency cannot change while step-up or step-down.
The difference is the magnitude of the potential difference between the same two reference points. The magnitude is greater in the second case than it is in the first case.
The difference is that high contrast has more black and low contrast has more white.
High oblique includes the horizon and low does not.
The difference between the high temperature of 90 F and low temperature of -2 F is 88 F.
the pressure ;)
high latency means you have a good connection, low latency means you have a baad connection
the high nile is where the current begins and the low nile is where the current ends
canny big i reckon
The difference between low percent error and high percent error is one is low and the other is high
high carbs are when carbs are high and low carbs are when carbs are low.
The difference is that high contrast has more black and low contrast has more white.
High oblique includes the horizon and low does not.
One is high and one is low.
The main difference between high quality and low quality energy is in the perception. This will facilitate the proper grading of tasks with the high tasks using high energy and low tasks low energy.
in on project that i saw for over current & earth fault protection high set setting had standard inverse curve and low set had l.t.i ( long time inverse) curve
The difference between high relief and low relief is that high relief has more depth and low relief is more casual and not as 3D. In high relief, it's much closer to 3D.
Low is at high temperature High is at low temperature It kind of has to do with the way the shower is at the humidity rate
It depends on the resistance level in that area if the soil have low resistance then they will use high impedance system and vice versa..so reason behind this have to reduce fault current.