One shrinks a little as it sets, one doesn't.
The obvious answer is sanded grout has sand. But the in depth answer has many differences. Sanded grout which is the most common, can be used in a grout joint from 1/8" to 1/2" (and larger but check the grout). Sanded grout scratches many tile like glass. Non sanded grout can only be used on joints 1/8" or less. Non sanded grout is typically seen on marble and granite tile, many wall tile, and all glass tile.
No, the tile is non porous, but the grout will need sealing.
Grout is not toxic. Grout sealers and adhesives can be toxic but not the grout itself. Tami Barker www.mosaicforms.com Mosaic Art Instructor and Creator
Grout is a substance that is used to fill gaps between tiles, such as in a shower or bathroom. Grout may be made of small aggregate, sand, and Portland cement. It may also be made of Portland cement or masonry cement and sand. There are many different types of cement, and these are usually used as an ingredient with which to make concrete and mortar.
Yes, you can change the color of the grout. There are products that you can use to try to die the grout or you can just have your tile re-grouted.
The obvious answer is sanded grout has sand. But the in depth answer has many differences. Sanded grout which is the most common, can be used in a grout joint from 1/8" to 1/2" (and larger but check the grout). Sanded grout scratches many tile like glass. Non sanded grout can only be used on joints 1/8" or less. Non sanded grout is typically seen on marble and granite tile, many wall tile, and all glass tile.
shrink is something that has happened and shrinking is happening in present.
Oil Hardened Non-shrinking Steel
Non Sanded grout can be used in any size grout joint but is ideal in smaller joints usually up to 1/4" The main draw back to using unsanded grout in larger joints is that it may crack over time. If you are unwilling to remove all the grout and use a sanded grout, it is best to make sure the grout is cured and sealed properly to limit and minimize cracking.
9
You can use two different types of grout for bathroom showers. If your tile requires a thin line of grout then it would be best to use a non-sanding type and for tile that requires a wider line of grout its best to use a sanding type.
Chalkboard paint is fairly easy to make. It takes 1 part non sanded grout to 8 parts paint. Non sanded grout is available at any home improvement store.
Clean grout can be realized in one's bathtub area, for example, by using the appropriate cleaning agent. A natural and non-toxic way to clean grout is to use water mixed with baking soda.
No, the tile is non porous, but the grout will need sealing.
Since there are many features of grout, this will depend on your question. There are epoxy grouts and latex modified grout. Epoxy grout is very stain resistance. The problem lies in that epoxy grouts are hard for a novice to use. Latex modified thin-sets are durable when used correctly. Additionally, you need to make sure you buy sanded or non sanded grout depending on the size of the grout joint and type of tile. If you have many natural stones, glass tile, or a tile with a great deal of shine, you will need a non sanded grout. Many bathrooms need this regardless, because their grout joint is 1/8" or less. All joints larger than 1/8" require sanded grout. This means you must be cautious before you begin, you place your joints correctly for the style tile you have.
Ceramic tile grout cleaner is most certainly not safe to use around children as it will contain various harmful chemicals. It is better to look for a specific non-toxic grout cleaner instead.
It is somewhat painstaking. There is a grout removal tool available at most big box hardware stores. It is basically a handsaw that uses hardened aggregate applied to the blade instead of teeth. You have to shave each joint down to a level below the surface that a new grout can be applied to and adhere (about 1/8" for non-sanded grout and 1/4" for sanded grout). If you are changing grout colors, you will want to use an acid (muriatic acid) to wash down the joint edges to remove any small amounts of the old grout at the surface edge that remain, prior to new grout installation. Because you are not installing the new grout to the full tile depth, it is advisable to use a latex additive to prevent cracking.