A 'live' or 'hot' wire is a wire that is connected to a power source. This wire supplies voltage to a load ( light bulb, hair dryer, etc.). When the load is also connected a neutral or another live wire this becomes a path for the flow of current (amps) known as a circuit.
The function of the live wire in a 3 pin plug is to deliver the voltage potential to the device when is plugged into the receptacle.
In an electrical socket, there are three holes. One is a hot wire, one is a neutral wire, and one is a ground wire. Usually, the hot wire is black. The neutral wire is white. And the ground wire is green. Motors usually have three pin plugs. Other items also have them. When a motor has a three pin plug, the body of the motor is attached to the ground. If a spark goes from the electrical wires to the body of the motor, it will go harmlessly to the ground and not hurt anyone. On a two pin plug, usually one pin is larger than the other. The larger pin goes to the neutral or white wire. It is also grounded. That way if there is an electrical short in the device, it should not electrocute the person using it.
No, it is not ok, it is potentially very dangerous because the two-wire cable has no earth with it. The earth wire is an important safety component that comes with a three-pin plug. An exception can be made for certain low-power appliances that have double insulation. This includes TV sets, radios, and table lights provided the mounting is plastic and not metal. These appliances are commonly sold with a twin-wire cable but often with a three-pin plug on the end of it. The three-pin plug in this case often has a plastic 'earth' pin and it is safe to replace it with a two-pin plug.
In the UK Brown is the live, blue is the neutral and green/yellow is the earth. The live and neutral are the two wires that normally carry the current.
Pin 1 = ground, Pin 2 = hot/plus, Pin 3 = cold/minus
The three pins are live, neutral and earth. The live and neutral carry the current, and the earth should carry no current. Its function is to connect together the external parts of all pieces of equipment so that it's impossible to get a shock by touching two items at once. Another function is to connect the external parts to an earth rod and to the gas and water pipes in the property. Another function is that if an internal fault allows a live wire to touch the case, enough current will flow to blow the fuse or trip the circuit breaker. So in different ways the earth pin/wire provides an important safety feature. In Europe the earth wire is coloured green and yellow.
it gives you an electric shock
On a UK three pin plug the two smaller prongs are Live (brown) and Neutral (blue). The Larger pin is for the Earth wire. This can prevent you getting an electric shock
The earth wire.
it is the brown wire in a three pin plug
In an electrical socket, there are three holes. One is a hot wire, one is a neutral wire, and one is a ground wire. Usually, the hot wire is black. The neutral wire is white. And the ground wire is green. Motors usually have three pin plugs. Other items also have them. When a motor has a three pin plug, the body of the motor is attached to the ground. If a spark goes from the electrical wires to the body of the motor, it will go harmlessly to the ground and not hurt anyone. On a two pin plug, usually one pin is larger than the other. The larger pin goes to the neutral or white wire. It is also grounded. That way if there is an electrical short in the device, it should not electrocute the person using it.
No, it is not ok, it is potentially very dangerous because the two-wire cable has no earth with it. The earth wire is an important safety component that comes with a three-pin plug. An exception can be made for certain low-power appliances that have double insulation. This includes TV sets, radios, and table lights provided the mounting is plastic and not metal. These appliances are commonly sold with a twin-wire cable but often with a three-pin plug on the end of it. The three-pin plug in this case often has a plastic 'earth' pin and it is safe to replace it with a two-pin plug.
In the UK Brown is the live, blue is the neutral and green/yellow is the earth. The live and neutral are the two wires that normally carry the current.
A 3 pin plug has a clamp on it to stop the wires from being ripped out of the plug when people use the wire to remove a plug from the wall instead of gripping the plug and removing it the proper way.
Pin 1 = ground, Pin 2 = hot/plus, Pin 3 = cold/minus
You don't. A 2 prong plug has two wires, one called live (black or red wire in the US) and the other is neutral (white or gray wire in the US). A 3 prong plug needs a third wire for ground (bare copper, green, or green-yellow in the US). The only time you can replace a 2 prong plug with a 3 prong plug is if the 2 prong plug incorrectly replaced an original 3 prong plug.
The three pins are live, neutral and earth. The live and neutral carry the current, and the earth should carry no current. Its function is to connect together the external parts of all pieces of equipment so that it's impossible to get a shock by touching two items at once. Another function is to connect the external parts to an earth rod and to the gas and water pipes in the property. Another function is that if an internal fault allows a live wire to touch the case, enough current will flow to blow the fuse or trip the circuit breaker. So in different ways the earth pin/wire provides an important safety feature. In Europe the earth wire is coloured green and yellow.
That is potentially dangerous and should never be done. See an electrician about this problem.