between $5 -$10 a square foot depending on grout size ie. 1/8- 1/2
grout removal and replacement is a hard and long project unless you already have the tools and knowledge, If you hire a tile contractor you are likely to spend anywhere from 2.50 to 3.50 a sq foot depending on the age of the grout and the thickness and width of the grout..........
form_title= Tile Grout form_header= Give your home a face lift with new tile grout! Do you want to install new grout?*= () Yes () No () Not Sure Do you want to clean out old grout?*= () Yes () No () Not Sure What color do you want the grout?*= _ [50] How old is the grout in your home? *= _ [50]
GP2 means Grout in Powder form EP10 Epoxy grout in powder form
The cost of the removal of a ceramic tiled floor can vary depending on the company used and size of the area that the floor covers. It is best to call different contractors to obtain estimates before settling on one. One may also save some money by breaking the tiles up themselves, and then hiring someone to remove the grout.
Depending on where you purchase the grout, you can actually have the grout colored to any color of your choice. Like paint, you can take in a color swatch and get the grout dyed to match the decor.
grout removal and replacement is a hard and long project unless you already have the tools and knowledge, If you hire a tile contractor you are likely to spend anywhere from 2.50 to 3.50 a sq foot depending on the age of the grout and the thickness and width of the grout..........
Tile is an Italian ceramic is about $5.29 a square foot. Tile, grout, tax is around $3000.00, from local store in NJ.
Just a rebuild could cost you 500-800 USD parts and labor. Removal not included neither is remounting.
Yes. You can remove grout around tiles by using a mechanical device that scrapes it away. The tool tip is usually made of tungsten carbide and has several teeth to gouge away the grout. You can either use a fairly cheap unpowered one or a more expensive one that uses power. You can also buy liquid grout remover for removal of grout residue.
Labor cost variance means the difference between standard labor cost and actual labor cost.
Average direct labor cost is the opening direct labor cost + closing direct labor cost / 2
2005 Freightliner.. what? At a diesel shop, you'll be looking at around $110 - $150/hour for labor, plus the cost of parts.. you're looking at at least three to four hours of labor for that job, when you consider disassembling and reassembling the radiator, plus removal and installation.
I need to get some grout and tile cleaning spray from the store. Who makes the strongest stuff? The people renting this house must have never cleaned their shower even once because it is absolutely caked on.
It is somewhat painstaking. There is a grout removal tool available at most big box hardware stores. It is basically a handsaw that uses hardened aggregate applied to the blade instead of teeth. You have to shave each joint down to a level below the surface that a new grout can be applied to and adhere (about 1/8" for non-sanded grout and 1/4" for sanded grout). If you are changing grout colors, you will want to use an acid (muriatic acid) to wash down the joint edges to remove any small amounts of the old grout at the surface edge that remain, prior to new grout installation. Because you are not installing the new grout to the full tile depth, it is advisable to use a latex additive to prevent cracking.
It is somewhat painstaking. There is a grout removal tool available at most big box hardware stores. It is basically a handsaw that uses hardened aggregate applied to the blade instead of teeth. You have to shave each joint down to a level below the surface that a new grout can be applied to and adhere (about 1/8" for non-sanded grout and 1/4" for sanded grout). If you are changing grout colors, you will want to use an acid (muriatic acid) to wash down the joint edges to remove any small amounts of the old grout at the surface edge that remain, prior to new grout installation. Because you are not installing the new grout to the full tile depth, it is advisable to use a latex additive to prevent cracking.
It is somewhat painstaking. There is a grout removal tool available at most big box hardware stores. It is basically a handsaw that uses hardened aggregate applied to the blade instead of teeth. You have to shave each joint down to a level below the surface that a new grout can be applied to and adhere (about 1/8" for non-sanded grout and 1/4" for sanded grout). If you are changing grout colors, you will want to use an acid (muriatic acid) to wash down the joint edges to remove any small amounts of the old grout at the surface edge that remain, prior to new grout installation. Because you are not installing the new grout to the full tile depth, it is advisable to use a latex additive to prevent cracking.
In labor intensive industry direct labor cost is used as cost driver.