225x
The total magnification of a compound microscope is calculated by multiplying the magnification of the ocular lens (usually 10x) with the magnification of the objective lens. If the lowest power objective has a magnification of 4x, then the total magnification would be 40x (10x * 4x).
The function of the ocular (eyepiece) is to magnify the image produced by the objective lens in a microscope or telescope, allowing the user to see the image more clearly. It typically provides a fixed magnification power for the device.
If the eyepiece magnifies 15 times, then when used with a 10x objective lens, the total magnification would be 150x (15x eyepiece magnification x 10x objective magnification). Additional magnifications could be achieved by using different objective lenses, such as 5x for a total magnification of 75x or 40x for a total magnification of 600x.
The lenses that enlarge an image on a microscope are called objective lenses. These lenses come in various magnification powers, typically ranging from low to high (e.g., 4x, 10x, 40x, 100x). The total magnification is determined by multiplying the magnification of the objective lens by the magnification of the eyepiece or ocular lens. Together, they allow for detailed observation of small specimens.
The eyepiece on a microscope typically magnifies the image by a factor of 10x, although this can vary depending on the specific eyepiece used. Some specialized eyepieces may offer higher magnifications, such as 15x or 20x. The total magnification of the microscope is calculated by multiplying the eyepiece magnification by the objective lens magnification. For example, using a 10x eyepiece with a 40x objective results in a total magnification of 400x.
The total magnification is calculated by multiplying the magnification of the ocular lens by the magnification of the objective lens. In this case, the total magnification would be 15x (ocular) x 43x (objective) = 645x.
To calculate the total magnification, you would multiply the magnification of the ocular lens (10x) by the magnification of the objective lens (15x). Therefore, the total magnification would be 10x * 15x = 150x.
Multiply the Ocular strength by the Objective strength. In this case: 60x, 150x, 675x, 1455x
The total magnification for each lens setting on a microscope with 15x oculars and various objective lenses would be as follows: 4x objective lens: 60x (4x * 15x) 10x objective lens: 150x (10x * 15x) 45x objective lens: 675x (45x * 15x) 97x objective lens: 1455x (97x * 15x)
The total magnification of a microscope is found by multiplying the ocular and objective together.
The typical magnification of the ocular lens on a light microscope is usually 10x, although some microscopes may have ocular lenses with magnifications of 5x, 15x, or even higher. This magnification works in conjunction with the objective lenses to provide a total magnification that can range from 40x to over 1000x, depending on the combination of lenses used.
To achieve a total magnification of 100x, you would use a 10x ocular lens (eyepiece) with a 10x objective lens. The total magnification is calculated by multiplying the magnification of the ocular lens (10x) by the magnification of the objective lens (10x).
magnification= ocular power *objective power=10X*60X
950
Multiply the Ocular strength by the Objective strength. In this case: 60x, 150x, 675x, 1455x
The total magnification would be 500x...you take the ocular and multiply it by whatever objective you are using.
The total magnification is calculated by multiplying the magnification of the objective lens by the magnification of the ocular lens. In this case, 4x (objective lens) x 10x (ocular lens) = 40x total magnification.